We are pleased to announce that we have received and carefully reviewed 59 contributions for the event. Out of these, we are delighted to inform you that 48 papers have been accepted. The authors have been notified and have received the valuable feedback provided by the reviewers.
We kindly request all authors to submit the revised versions of their papers no later than June 15th. Please send the revised papers in Word or LaTeX format to the following address: imeko_TC4_2023@senis.swiss
We are excited to share that the Conference Proceedings will be published in an e-format with the ISBN 978-3-033-09885-5. Furthermore, we are actively pursuing the indexing of the Proceedings in WoS (Web of Science).
During the Conference Closing Ceremony, we will also announce and present the Best Paper Awards. Additionally, we are pleased to inform you that improved versions of a significant number of the presented papers will be considered for publication in Special Issues of ELSEVIER's Journal Measurement and ACTA IMEKO Journal.
Thank you once again to all the authors for their valuable contributions and for being a part of this remarkable event. We look forward to your revised submissions and to sharing the remarkable research in our Proceedings and renowned journals.
Accepted papers:
Title | Author | Affiliation |
Evaluation of the long-term drift of measuring instruments and standards using time series | Oleh Velychko Tetyana Gordiyenko | 1State Enterprise “All-Ukrainian state research and production center for standardization, metrology, certification and consumers’ rights protection” (SE “Ukrmetrteststandard”), Kyiv, Ukraine 2State University of Telecommunications, Kyiv, Ukraine
|
Accurate Frequency and Damping Factor Estimation by Means of an Improved Three-point Interpolated DFT Algorithm | Daniel Belega Dario Petri Dominique Dallet | 1Department of Measurements and Optical Electronics, University Politehnica Timisoara, Romania 2Department of Industrial Engineering, University of Trento, Italy 3IMS Laboratory, Bordeaux INP, University of Bordeaux, CNRS UMR5218, Talence Cedex, France |
The development and tests of a preamplifier for the spectrum analyzer adopted for noise measurements in quantum Hall standard | Marcin Wojciechowski Kateryna Hovorova | GUM (Central Office of Measures), Warsaw, Poland |
The Wireless EMF Monitoring in Sensitive Areas around Kindergartens and Schools | Nikola Djuric Dragan Kljajic Nicola Pasquino Tamara Skoric | 1Faculty of Technical Sciences, University of Novi Sad, Serbia 2Dept. of Electrical Engineering and Information Technologies, University of Naples Federico II, Naples, Italy |
Evaluation of Long-Term Stability of High-Precision Standard for Low-Frequency Voltage Measurement | Oleh Velychko Valentyn Isaiev | State Enterprise “All-Ukrainian state research and production center for standardization, metrology, certification and consumers’ rights protection” (SE “Ukrmetrteststandard”), Kyiv, Ukraine
|
Lossless real-time signal encoding for two-channel signals: A case study on ECG | Jozef Kromka Ondrej Kováč Jan Saliga | Technical University of Kosice, Slovakia |
ADC Input Currents Measurement | Jakub Svatos Jan Fischer Jan Holub | Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Measurement, Prague, Czechia |
A calibration procedure for dc resistance ratio bridges | Martina Marzano Cristina Cassiago Vincenzo D'Elia Enrico Gasparotto Luca Callegaro | INRIM - Istituto Nazionale di Ricerca Metrologica, Torino, Italy |
A simple and accurate resistance comparator with a long-scale ratiometric digital multimeter | Martina Marzano Vincenzo D'Elia Massimo Ortolano Luca Callegaro | 1INRIM Istituto Nazionale di Ricerca Metrologica, Torino, Italy 2Politecnico di Torino, Torino, Italy |
Traceability routes for magnetic measurements | Marco Coïsson Javier Diaz De Aguilar Rois Yolanda Alvarez Sanmamed Orrie Larmour Sergio Molto Gonzalez Oliver Power Robert Walsh | 1INRIM, Torino (TO), Italy 2CEM, Tres Cantos (Madrid), Spain 3NSAI, Northwood, Santry, Dublin 9, Ireland |
A new type of rack for the clamp ammeter | Bin Deng Hongrui Yan Qian Chen Jianbo Liu Xiao Liu Xinyan Wang | Shandong Engineering Research Center of Reliability Evaluation for Electric Energy Metering Devices, Shandong Institute of Metrology, China |
A calibration method for D.C. comparator potentiometers | Bin Deng Jinyu Feng Zexin Guan Ru Jia Xiaoyan Sun Dalong Wang Xinyan Wang Hongrui Yan | Shandong Engineering Research Center of Reliability Evaluation for Electric Energy Metering Devices, Shandong Institute of Metrology, China |
Characterization of an accurate phase measurement system using transmission lines | Luca De Vito Francesco Picariello Sergio Rapuano Ioan Tudosa | Department of Engineering, University of Sannio, 82100 Benevento, ITALY |
Study on Calibration Method for Emergency Lighting and Evacuation Indicating System | Bin Deng | 1Shandong Engineering Research Center of Reliability Evaluation for Electric Energy Metering Devices, Shandong Institute of Metrology, China 2Shandong Institute of Metrology and Science, China |
Towards new IEC standards for the electrical characterization of graphene | Alessandro Cultrera | 1INRIM – Istituto Nazionale di Ricerca Metrologica, Italy 2International Standards Consulting GmbH & Co. KG, Deutschland 3IEC – International Electrotechnical Commission, Technical Committee 113 ”Nanotechnology for electrotechnical products and systems” |
Verification of thermal converters by means of a pulsed Josephson standard | Krzysztof Kubiczek | 1INRiM - Istituto Nazionale di Ricerca Metrologica, Italy 2Department of Measurement Science, Electronics and Control, Faculty of Electrical Engineering, Silesian University of Technology, Gliwice, Poland |
Novel 3D Hall sensor and its application in inspection robots | Dragana Popovic Renella Andrea Cavelti Marco Hutter Thomas Kaltenbacher Lennart Nachtigall Sasa Spasic Giorgio Valsecchi | 1SENIS Group, Switzerland 2RSL ETH Zurich, Switzerland |
Atomic density calibration at high-temperature | Erxat Arkin | 1Department of physics, Hangzhou Dianzi University, Hangzhou, China 2Magnetic quality laboratory, National Institute of Metrology, Beijing, China
|
DIN SPEC 91411: A standardized representation of magnetic scales | Jürgen Gerber | 1INNOMAG e.V., Kaiserslautern, Germany 2ITK Dr. Kassen GmbH, Lahnau, Germany
|
Calibration of Electric Wire Spark Tester Artificial Arcing System | Bin Deng | Shandong Engineering Research Center of Reliability Evaluation for Electric Energy Metering Devices, Shandong Institute of Metrology, China |
Pole positioning for precise magnetic measurement systems | Sebastian Rivera Rolf Slatter | ITK Dr. Kassen GmbH, Lahnau- Germany |
Rapid Prototyping of Vehicle Software Defined Functions | Jan Sobotka | Czech Technical University in Prague, Prague, Czech Republic |
Quantum sampling modular setup for practical power measurements based on a programmable binary Josephson voltage standard | Bruno Trinchera | INRiM-Istituto Nazionale di Ricerca Metrologica, Torino, Italy |
Analytical Models and Magnetic Position Systems | Michael Ortner Alexandre Boisselet Luiz Enger | 1Silicon Austria Labs, Villach, Austria 2Infineon Technologies Austria, Villach, Austria |
Crosstalk in Gapped-core Contactless Current Sensor | Noby George | Department of Measurement, FEL, Czech Technical University, Prague |
Rapid Prototyping of Automotive Magnetic Positioning Systems | Luiz Enger Ales Travnik Peter Leitner Michael Ortner Florian Slanovc | Silicon Austria Labs, Villach, Austria |
Custom Synthesizable VHDL Processor for Embedded Capacitive Angle Sensor Data Processing | J. Ligus Jan Saliga Cristian Stratyinski O. Benedikt Milos Drutarovsky Pavol Galajda Miroslav Sokol | 1Technical University of Kosice, Slovakia 2CTRL Ltd., Kosice, Slovakia |
Practical limitations of accurate magnetic measurements in industrial applications | A.Stuck M. Mijalkovic M.Vidojevic D. Popovic | SENIS Group, Switzerland |
A 10 V PJVS-based DC voltage realization at INRiM | Paolo Durandetto | INRiM - Istituto Nazionale di Ricerca Metrologica, Torino, Italy |
Quantum magnetometry with OPM: Novel applications in non-destructive testing? | Andreas Blug | 1Fraunhofer Institute for Physical Measurement Techniques IPM, Freiburg, Germany 2Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany |
Power System Frequency and ROCOF Measurement by Means of Electronic Instrument | Daniel Belega | Department of Measurements and Optical Electronics, University Politehnica Timisoara, Romania |
Introducing the SENIS SENCS1Dx: A Novel Current Sensor IC with Ultra-High Bandwidth and Exceptional Magnetic Resolution | Radivoje S. Popovic Dragana Popovic Renella Sasa Dimitrijevic Bojan Milenkovic Sasa Spasic | SENIS Group, Switzerland |
The Design of Vehicle Surround View Monitor | Ondrej Kováč | Technical University of Kosice, Slovakia |
Case study of NI G Web technology application for remote educational laboratory | Jozef Kromka Levente Fekete Jan Saliga | Technical University of Kosice, Slovakia |
Phase measurement methods based on timer modules | Sanja Mandic Dragan Pejic Djorde Novakovic Marjan Urekar Platon Sovilj | University of Novi Sad, Faculty of Technical Sciences, Serbia |
Metrology and Capacity Building in Higher Education: Project Knowledge triangle for a low carbon economy (KALCEA) | Platon Sovilj | University of Novi Sad, Faculty of Technical Sciences, Serbia |
Digital Stochastic Measurement and Industry 4.0 | Platon Sovilj | University of Novi Sad, Faculty of Technical Sciences, Serbia |
Decoding Cognitive Processes in Arithmetic Tasks: An EEG-Based Convolutional Neural Network Model | Nikola Petrovic Lemana Spahic Sanja Mandic Platon Sovilj | University of Novi Sad, Faculty of Technical Sciences, Serbia |
Demonstration stand for non-destructive conductive material defect inspection by eddy current | Alena Pietrikova | 1Technical University of Kosice, Slovakia 2Magna Electronics Slovakia Ltd., Slovakia, |
Novel quality assessment protocol based on Kiviat diagram for pulsed wave Doppler diagnostic systems: first results | Giorgia Fiori | Dep. of Industrial, Electronic and Mechanical Engineering, Roma TRE University, Rome, Italy |
First experimental results of a novel arterial simulator with PWV adjustment | Federico Filippi | Dep. of Industrial, Electronic and Mechanical Engineering, Roma TRE University, Rome |
The AMPWISE Project | Marjan Blagojevic | 1Senis AG, Switzerland 2 Safran Electrical & Power, France 3Serma Ingenierie, France 4Imperial College London, U.K 5CSEM, Neuchatel, Switzerland
|
Teamwork of Simulations and Hall Sensor | Thomas Schliesch | Max Baermann GmbH, Germany |
First results on torque estimation by FEA and experimental analysis in a novel CSFH-based microgripper | Gabriele Bocchetta Giorgia Fiori Federico Filippi Pietro Ursi Salvatore Andrea Sciuto Andrea Scorza | 1Dep. of Industrial, Electronic and Mechanical Engineering, Roma TRE University, Rome, Italy 2Dep. of General Surgery and Surgical Specialties “Paride Stefanini”, Sapienza University of Rome, Italy |
A Preliminary Comparison of Three Methods for the Assessment of Pulse Wave Transit Time in an Arterial Simulator | Federico Filippi | Dep. of Industrial, Electronic and Mechanical Engineering, Roma TRE University, Rome, Italy |
Magnetic stray field analysis over large areas using Hall- and magneto-optical sensors | Benjami Wenzel Matthias Schmidt | Matesy GmbH, Jena, Germany |
Current Measurements for Fault Diagnosis in Induction Motors | Simone Mari Andrea Credo Giovanni Bucci Fabrizio Ciancetta, Edoardo Fiorucci Andrea Fioravanti | University of L’Aquila, Dept. of Industrial and Information Engineering and Economics, L’Aquila (AQ), Italy |
Phase Noise Measurement of ASIC Voltage Controlled Oscillator and PLL Circuit ADF4002 | Patrik Jurík Miroslav Sokol Pavol Galajda | Department of Electronics and Multimedia Telecommunications, Technical University of Kosice, Slovakia |