Name: IMEKO 2024 XXIV World Congress
Start: 2024-08-25T08:00:00+02:00
End: 2024-08-30T20:20:00+02:00
Location: Congress Center Hamburg

1 kN·m BINARY DEAD WEIGHT TORQUE STANDARD MACHINE AT SASO / NMCC (in session "Poster Session")

3-axis Accelerometer characterization: a dynamic analysis varying the operating temperature (in session "Technical Sessions")

3D nanometrology (in session "Technical Visits")

4D CT inspection of the preserved sandstone subjected to compression loading (in session "Technical Sessions")

150 Years of Metrology in Serbia (in session "Poster Session")

"Comparative studies of stations for transferring mass units" (in session "Poster Session")

[CHANGED TO POSTER ON WED] Standard photoelectric pyromete (in session "Technical Sessions")

A 12-lead ECG correlation analysis (in session "Technical Sessions")

A Contribution to Sustainability – Towards Green Calibration Laboratory for Electrical Instruments (in session "Technical Sessions")

A Critical Appraisal of Image Quality in Radiomics for Enhanced Medical Diagnostics (in session "Poster Session")

A DELAY & SUM BEAMFORMING IMAGE-BASED ALGORITHM FOR DETECTING GAS AND TEMPERATURE IN A ROCKY VOLCANIC THEATER (in session "Technical Sessions")

A Digital Expert for a Digital Key Comparison Report Processor (in session "Technical Sessions")

A first proposal of diagnostic strategy for microelectronics using resistance measurement under dynamic mechanical loads (in session "Technical Sessions")

A flow measurement method based on the direct functional linearizing the dependence of the reaction force on the measured flow rate. Linear reaction flowmeters (in session "Poster Session")

A Framework for Streamlining Digital Supply Chain Integration through Software Interoperability Analysis (in session "Technical Sessions")

A Fuzzy Ewplanatory Model to Assess the Mode of Vigilance in Avalanche Terrain (in session "Technical Sessions")

A Lightweight Investigation on Automated Visual SMD-PCB Inspection based on Multimodal One-class Novelty Detection (in session "Technical Sessions")

A metrological perspectrive on data analysis methods in gamma-ray spectrometry (in session "Technical Sessions")

A multi-factor correction matrix for SLA additive technology with the use of coordinate measuring technique (in session "Technical Sessions")

A Neural Signature of Error Processing in Motor Learning measured as Error-Related Negativity (in session "Technical Sessions")

A NEW APPROACH FOR AN ACCURATE SKIN MELANOMA DIAGNOSIS BY THERMOGRAPHYC INSPECTION (in session "Poster Session")

A New Deadweight Force Standard Machine for Classifying C6 Load Cells Under Temperature Conditions (in session "Technical Sessions")

A new method for ‘dry Calibration’ of electromagnetic flowmeters (in session "Technical Sessions")

A new multivariable multiplexer applied to the calibration of multifunction calibrators (in session "Poster Session")

A novel approach of sensitivity coefficients determination for various Rockwell hardness scales using a diamond indenter (in session "Technical Sessions")

A novel vegetation index for the detection and age determination of tree resin (in session "Technical Sessions")

A Novel Virtual Modelling Tool for Investigating Time-Shift Estimation Methods in Coriolis Mass Flowmeters (in session "Technical Sessions")

A Ray Deflection Model for the Transit Time Difference in Ultrasonic Flowmeters Applied to Non-ideal Flow Profiles (in session "Poster Session")

A SURVEY OF SENSOR TESTING METHODS FOR HYDROGEN LEAKAGE DETECTION AND PURITY ANALYSIS (in session "Technical Sessions")

A Temperature-controlled Heat-pipe Standard Resistor Thermostat (in session "Technical Sessions")

A TOOL FROM THE PAST TURNS INTO A USEFUL TOOL FOR PRESICE POINT STAKE OUT IN INDUSTRIAL GEODESY APPLICATIONS (in session "Poster Session")

A two-layer deep learning-powered optical character recognition for enhance calibration processes (in session "Technical Sessions")

A VEHICULAR REFERENCE INSTRUMENT FOR FIELD VERIFICATION OF TRAFFIC SPEED METERS BASED ON LASER DOPPLER VELOCIMETER (in session "Technical Sessions")

A Web-based Tool for Automated Metadata Annotation and FAIR Data Management of Autonomous Driving Sensor Data (in session "Technical Sessions")

Absolute calibration for BDS time transfer receiver (in session "Technical Sessions")

Accuracy and dynamics of flow measurements to 1 nL/min and below using an optofluidic flow meter (in session "Technical Sessions")

Accurate measurements with Josephson-based quantum voltage standards (in session "Technical Sessions")

Accurate quantification of desmosine and isodesmosine in elastin peptides based on HPLC-MS/MS (in session "Poster Session")

Adaptive correction and estimation of the dynamic measurement error in the sensor input signal restoration (in session "Technical Sessions")

Admission for City Hall Hamburg (in session "Social Event")

Advanced Optics-powered Resolution Enhancement Using Convolutional Neural Networks for Critical Dimension Metrology in Bright-Field Microscopy (in session "Technical Sessions")

Advanced Signal Processing Using Automated Uncertainty Propagation - An Educational Approach (in session "Technical Sessions")

Advanced Thermodynamics of Hydrogen and Natural Gas Blends for Gas Transmission and Distribution Networks (in session "Technical Sessions")

ADVANCEMENTS IN PREDICTIVE MAINTENANCE MODELLING FOR INDUSTRIAL ELECTRICAL MOTORS: INTEGRATING MACHINE LEARNING AND SENSOR TECHNOLOGIES (in session "Technical Sessions")

Advancing Fusarium oxysporum f.sp. cubense Tropical Race 4 Detection: Genomic DNA Reference Material Development (in session "Technical Sessions")

Aerodynamic characteristics of runners in long-distance running with platooning (in session "Poster Session")

Algorithm to robustly determine pitch and height of 1D grating measurement standards (in session "Technical Sessions")

Alpha and gamma spectrometry (in session "Technical Visits")

An Accurate Current-to-Voltage Converter for the New AC Power Standard at PTB (in session "Poster Session")

An approach to integrate Artificial Intelligence in ISO 9001-based quality management systems (in session "Technical Sessions")

An in-situ gas flow verifier based on rate-of-rise dynamic pVTt method (in session "Technical Sessions")

An Integrated Framework for Risk Assessment in Digital Verification and Validation (in session "Poster Session")

An ultrastable metrology laser for traceable length metrology in nanopositioning machines – towards an 10-12 uncertainty level (in session "Technical Sessions")

An Unbalanced Vibration Force Suppression Method for the Rotational Speed Standard Device (in session "Technical Sessions")

Analysis and Research on Error Calculation Model of OIML R76 and Reality Application (in session "Poster Session")

Analysis of Ageing Effects on Static Gas Meters (in session "Technical Sessions")

Analysis of Brinell Hardness in relation to the permanent and maximum depth of indentation and the strength limit of metallic materials (in session "Poster Session")

Analysis of Measurement Comparison Results and Uncertainty of Industrial Platinum Resistance Thermometer (in session "Poster Session")

Analysis of natural variations in axle loads (in session "Technical Sessions")

ANALYSIS OF THE INFLUENCE OF INDUSTRIAL TYPICAL DISTURBANCE ON GAS FLOW MEASUREMENT ACCURACY – A SIMULATION STUDY (in session "Poster Session")

Analysis of the interpolation parameters to estimate the errors at specific force values in continuous calibration (in session "Poster Session")

Analysis of the Measurement Accuracy of a Thermal 3D Sensor for Transparent Objects (in session "Technical Sessions")

Analysis of three methodologies for characterization of triaxial accelerometers type MEMS (in session "Technical Sessions")

Analytical results for uncertainty propagation through trained machine learning regression models (in session "Technical Sessions")

Anomaly Score for Rotational Machines Using Conditional Variational Auto-Encoder Adaptable to Speed Changes (in session "Technical Sessions")

Application and traceability of rotational speed instruments based on vibration measurement (in session "Poster Session")

Application of calibrated X-ray computed tomography in micro-scale hidden structure dimensional measurement (in session "Technical Sessions")

Application of clamp-on type ultrasonic flowmeter in the monitoring of natural gas flow (in session "Technical Sessions")

Application of digital twin and intelligent control for efficiency improvement in natural gas flow meter calibration station (in session "Poster Session")

Application of uncertainty propagation in deep neural networks: Innovations in metrology and the introduction of QuadLU activation function (in session "Technical Sessions")

APPLICATION OF WHEAT HARDNESS INDEX TESTER (in session "Poster Session")

Applications of iterated linearization for nonlinear errors-in-variable regression to metrological data (in session "Technical Sessions")

Arrival (in session "Technical Visits")

Asphere metrology (in session "Technical Visits")

Assessing the measurement performance of flow meters close to operating conditions (in session "Technical Sessions")

Assessment of Reference Materials for Lead and Cadmium in Milkfish: Implications for Food Safety in the Philippines (in session "Poster Session")

Assessment of the accuracy of standards manufactured by SLA additive technology (in session "Technical Sessions")

ASSESSMENT OF THE ENERGY CONSUMPTION OF THE GLASS PRODUCTION PROCESS BY COMPRESSED AIR FLOW MEASUREMENTS (in session "Poster Session")

Assessment of the Fused-Silica Triple Point of Water Cells Developed at NIM (in session "Technical Sessions")

ASSUMPTIONS OF THE DIGITAL TWIN IN COORDINATE METROLOGY (in session "Poster Session")

Atomic electronics (in session "Technical Sessions")

AUTOMATED VOLUME MEASURING SYSTEMS FOR SINGLE AND STACK TIMBER LOGS. CONFORMITY ASSESSMENT SOLUTIONS (in session "Poster Session")

Automation in sensor network metrology: an overview of methods and their implementations (in session "Technical Sessions")

Award for Precision Measurements in Applied Science (in session "Social Event")

Award for Precision Measurements in Fundamantal Research (in session "Social Event")

Basic concept of testing chip for micro flow rate (in session "Poster Session")

Beam divergence errors in unbalanced laser interferometers – case study with a free-fall absolute gravimeter FG5X (in session "Technical Sessions")

Behaviour of the piston manometers at low piston rotation rates (in session "Poster Session")

BeiDou system time monitoring with a new homemade GNSS time transfer receiver (in session "Technical Sessions")

Bias-induced Impedance Effect: Selection of Physically Consistent Electrical Models (in session "Poster Session")

Bilateral comparison of gas microflow primary standards in the range between 0.12 mg/min and 2.4 mg/min (in session "Poster Session")

Biomechanical movement analysis by inertial sensors: an application to swimming (in session "Technical Sessions")

Biometrology and standards research and application (in session "Technical Sessions")

Bioorganic metrology (in session "Technical Visits")

Break + departure of the buses (in session "Technical Visits")

Bridging Mathematics and AI: A Novel Approach to Goldbach's Conjecture (in session "Technical Sessions")

BRIDGING THE METROLOGICAL DIVIDE BY EMPOWERING DEVELOPING COUNTRIES (in session "Technical Sessions")

Bus Nr- 6 Departure (in session "Technical Visits")

Bus Nr. 1 Departure (in session "Technical Visits")

Bus Nr. 1 for Technical Visit Airbus Departure (in session "Technical Visits")

Bus Nr. 2 Departure (in session "Technical Visits")

Bus Nr. 2 for Technical Visit Airbus Departure (in session "Technical Visits")

Bus Nr. 3 Departure (in session "Technical Visits")

Bus Nr. 3 for Technical Visit EMH Departure (in session "Technical Visits")

Bus Nr. 4 Departure (in session "Technical Visits")

Bus Nr. 4 for Technical Visit EMH Departure (in session "Technical Visits")

Bus Nr. 5 Departure (in session "Technical Visits")

Bus Nr. 5 for Technical Visit ZAL Departure (in session "Technical Visits")

Bus Nr. 6 for Technical Visit ZAL Departure (in session "Technical Visits")

Bus Nr. 7 Departure (in session "Technical Visits")

Bus Nr. 7 for Technical Visit Calibration Directorate North Departure (in session "Technical Visits")

Bus Nr. 8 Departure (in session "Technical Visits")

Bus Nr. 8 for Technical Visit Calibration Directorate North Departure (in session "Technical Visits")

Bus Nr. 9 Departure (in session "Technical Visits")

Bus Nr. 9 for Technical Visit XFEL Departure (in session "Technical Visits")

Bus Nr. 10 Departure (in session "Technical Visits")

Bus Nr. 10 for Technical Visit DESY Departure (in session "Technical Visits")

Bus Nr. 11 for Technical Visit DESY Departure (in session "Technical Visits")

Bus Nr. 12 for Technical Visit HHLA Departure (in session "Technical Visits")

Bus Nr. 13 for Technical Visit HHLA Departure (in session "Technical Visits")

Calibration and performance analysis of SASO-NMCC’s two-pressure (2-P) humidity generator for traceable highly accurate humidity measurements (in session "Poster Session")

Calibration Data Mining – Perspectives from Novo Nordisk (in session "Technical Sessions")

Calibration of atomic force microscope cantilevers based on μ-LDV: metrological insight on the constitutive experimental parameters of Sader’s formula for spring constant (in session "Technical Sessions")

Calibration of devices with a digital output – Challenges for calibration laboratories (in session "Technical Sessions")

Calibration of High-Capacity Scales using Hydraulics Instead of Weights: Metrological Traceability and Measurement Uncertainty (in session "Technical Sessions")

Calibration of low-frequency sound measurement device using low-frequency vibration of liquid column (in session "Technical Sessions")

Calibration of sensors for indirect sea-wave measurement: experimental aspects (in session "Technical Sessions")

Calibration of the stiffness of soft cantilevers based on electromagnetic and electrostatic force compensation principles (in session "Technical Sessions")

Case study of optimization of acceptance interval for conformity assessment (in session "Technical Sessions")

Categorization of Splashes in Shock Tube-Based Underwater Blast Experiments (in session "Technical Sessions")

CCT K11 BLACKBODY TEMPERATURE FROM 34.5 °C TO 41.5 °C – reporting and evaluation in the EURAMET loop using Digital Calibration certificates (in session "Technical Sessions")

Certification of evaluation algorithms for involute cylindrical gears on coordinate measuring machines (in session "Technical Sessions")

Champagne Reception (in session "Social Event")

Characteristics evaluation of MEMS atmospheric pressure sensors (in session "Technical Sessions")

Characterization of Spektra DPE-02 dynamic pressure exciter for the dynamic calibrations of pressure sensors (in session "Technical Sessions")

Characterization of the Velocity and Concentration of Pneumatically Conveyed Particles in the Upstream of the Acoustic Emission Waveguide through CFD-DEM Modelling and Electrostatic Sensing (in session "Technical Sessions")

Charging station, ELVIS (in session "Technical Visits")

Chemical sensing vs. gas chromatography: metrological characterization of two methods for hydrogen quantification in energy gas blends. (in session "Poster Session")

Chip-scale force elastic proving device for instrumented indenter force calibration (in session "Technical Sessions")

CIPM/IMEKO Workshop on Metrological Traceability Part I (in session "Workshop")

CIPM/IMEKO Workshop on Metrological Traceability Part II (in session "Workshop")

Closing and Music (in session "Social Event")

Collaborative innovation in digitization for the monitoring of environmental conditions of NMI´s in the SIM region (in session "Technical Sessions")

Combination of pipette aspiration and OCT: a novel method for frequency-dependent elasticity assessment of silicone tissue phantoms (in session "Technical Sessions")

Combining ratings with traditional assessment data using a mixed fixed/random psychometric model (in session "Technical Sessions")

Committee for Weights and Measures (in session "Keynote")

COMMON FEATURES AND PECULIARITIES IN FORCE AND OTHER MECHANICAL QUANTITIES MEASUREMENTS (in session "Poster Session")

COMPARATIVE ANALYSIS OF SEGMENTATION TECHNIQUES FOR MORPHOMETRIC MEASUREMENT OF FISH BLOOD CELLS (in session "Poster Session")

Comparative Assessment of Temperature Calibration for Moisture Analysers (in session "Poster Session")

Comparative Calibration of a Single-Photon Avalanche Detector at NIST and PTB (in session "Technical Sessions")

Comparison between an optical pressure standard based on multi-reflection interferometric technique and conventional primary standards (in session "Technical Sessions")

Comparison between linear GUM Analysis and Monte Carlo Method for the Uncertainty Budget Estimation of the air flow velocity standard based on Pitot Tube and wind tunnel (in session "Technical Sessions")

Comparison of different uncertainty evaluation methods for Virtual Experiments with an application to a virtual CMM (in session "Technical Sessions")

Comparison of gravimetric standards for hydrogen refuelling stations (in session "Technical Sessions")

Comparison of Measurement Methods for the Microcalorimeter Correction Factor (in session "Technical Sessions")

Comparison of Pressure Measurement Methods Used in Ballistic Tests (in session "Poster Session")

Comparison of primary standards for liquid flow in the range from 0.1 to 10 microL/min (in session "Technical Sessions")

Comparison of three different traceability methods for the measurand "high alternating voltages" at the PTB (in session "Poster Session")

Comparison of Triple Point of Water Cells with Isotopic Compositions between NIM and PTB (in session "Technical Sessions")

Comparison of two approaches to data fusion in system for action recognition based on data from impulse-radar sensors and depth sensors (in session "Technical Sessions")

Comparison of wind velocities measured by high resolution bistatic wind lidar and 3D scanning coherent lidar (in session "Technical Sessions")

Conceptual Harmonisation between d-CoC and DCC Data Structures Representing Result Documents in Conformity Assessment (in session "Technical Sessions")

Concrete Testing Machines – Verifying the upper plate and machine components with 3D printed positioning mechanisms (in session "Technical Sessions")

Conformance of the Mettler Toledo Automatic Balance to EU Measuring Instrument Directive for use of Automatic Weighing Instrument (AWI) in regulated markets (in session "Poster Session")

Consideration of software quality and reusability in the generation of digital calibration certificates (in session "Technical Sessions")

Construction of the Vacuum Fixed Length Optical Cavity Pressure Standard (in session "Technical Sessions")

Consumer/Producer risks for decentered NAWI’s manufacturing processes (in session "Poster Session")

Contribution to the Calibration of Current Transformers with Rated Secondary Currents less than 1A (in session "Technical Sessions")

Controllable volumetric prover development aimed at establishing quantitative indicators of transitional flow rate (in session "Technical Sessions")

Coordinate metrology (in session "Technical Visits")

Coordinate Metrology (in session "Technical Visits")

Coping with Concept Drift in a Virtual Metrology Application to Predict Part Quality in Micro Gear Manufacturing (in session "Technical Sessions")

Coriolis Flow Metering technology in CO2 measurement: An empirical review of accuracy performance under influence of process conditions across the value chain. (in session "Technical Sessions")

CORRECTING ROCKWELL HARDNESS VALUES BASED ON IMPROVED MEASUREMENTS OF DIAMOND INDENTERS USING CONFOCAL LASER SCANNING MISCROSCOPE (in session "Technical Sessions")

Correction of measurement accuracy depending on the direction vector of the point. (in session "Technical Sessions")

Cross-Domain Dynamic Vocabulary in Metrological Use Cases: Linkage, Automatization and Implementation (in session "Poster Session")

Cryogenic Tests of Electronic Components and Sensors for Superconducting Magnet Instrumentation (in session "Poster Session")

Current status and analysis of atomic interferometric inertial measurement research (in session "Technical Sessions")

CUSTOMER EXPERIENCE MANAGEMENT FROM THE PERSPECTIVE OF CORPORATE SUSTAINABILITY: PROPOSITION OF INDICATORS AND METRICS (in session "Poster Session")

Data Structures in Calibrations of Weights and Mass Standards (in session "Technical Sessions")

DATA-DRIVEN CALIBRATION OF TEMPERATURE SENSORS FOR MONITORING AND CONTROL OF INJECTION MOLDING MACHINE (in session "Poster Session")

DCC2GO - Supporting the implementation of Digital Calibration Certificates in the European metrology community (in session "Poster Session")

DCC Measurement Results XML code through a spreadsheet (in session "Technical Sessions")

DEALING WITH TILT IN VERY LOW FREQUENCY PRIMARY VIBRATION CALIBRATION (in session "Technical Sessions")

Decomposition of Flow Velocity by Using "X"-Shaped Arrangement of Ultrasound Paths in a Turbulent Pipe Flow (in session "Technical Sessions")

Density Determination of CO2-Rich Fluids within CCUS Processes (in session "Technical Sessions")

Design Advances on the Dual Species Cold Atom Based Pressure Standard (in session "Poster Session")

Design and characterization of an energy-efficient underwater system for temperature and acoustic emission monitoring (in session "Technical Sessions")

Design and Development of a Packed Bed (PB) Heat Exchanger for Isobaric and Constant Volume Compressed Air System – A Study of heat characteristics of a PB element. (in session "Poster Session")

Design and Implementation of a Digital Calibration Certificate Web Service System Based on Microservice Architecture (in session "Technical Sessions")

Design of a cryogenic liquid flowmeter calibration system using liquid nitrogen (in session "Technical Sessions")

Design of a low-cost system for the high-frequency measurement of the radial displacements of a cylindrical metal target (in session "Technical Sessions")

Design of a micro gas flow calibration facility by Piston Prover method (in session "Technical Sessions")

DESIGN OF OPTICALLY PUMPED MAGNETOMETER FOR IN-FIELD CALIBRATION OF VECTOR MEASUREMENT IN BOREHOLE (in session "Technical Sessions")

DETERMINATION OF THE UNCERTAINTY OF LENGTH MEASUREMENT WITH A THREE-COORDINATE MEASURING DEVICE (in session "Technical Sessions")

Developing a digital twin to measure and optimise HPC efficiency (in session "Technical Sessions")

Development and calibration of a measurement system for the characterization of avalanche photodiodes prospectively used as sensors in X-ray Compton polarimeters for space (in session "Technical Sessions")

Development and testing of a GFA ultrasonic gas meter that does not require the use of straight sections (in session "Technical Sessions")

Development and validation of a low-cost alternative sound level meter (in session "Technical Sessions")

Development and Validation of a Methodology for Measuring Deformation and Impact Energy in high Speed Tests Using Computer Vision (in session "Poster Session")

Development and Validation of Methods for the Determination of Water-soluble and Acid-soluble Sulfate in Concrete (in session "Technical Sessions")

Development and verification of an integrated turbine flowmeter with energy metering function (in session "Poster Session")

Development of a calibration device for imaging spectrometers (in session "Technical Sessions")

Development of a handheld coordinate measuring machine with scanning touch probe (in session "Poster Session")

Development of a heat flow sensor for battery electric vehicle (BEV) investigations (in session "Technical Sessions")

Development of a mailed dosimetry audit system for radiation therapy in Canada (in session "Technical Sessions")

DEVELOPMENT OF A MEASUREMENT SCIENCE CURRICULAR UNIT WITHIN THE “OPTION UMINHO” ACADEMIC FRAMEWORK (in session "Technical Sessions")

Development of a methodology for MEMS accelerometer health state estimation (in session "Technical Sessions")

DEVELOPMENT OF A PRIMARY STANDARD FOR PARTICLE NUMBER CONCENTRATION (in session "Poster Session")

Development of a proximity contactless ammeter based on GMR sensors for measuring direct currents (in session "Poster Session")

Development of a Size-of-Source Effect Measurement System for IR Thermometers without Water-Cooling Aperture (in session "Poster Session")

Development of a Two-Fingered Robotic Hand Capable of Reproducing Five Types of Palpation Movements (in session "Technical Sessions")

Development of accuracy inspection system with master meter method for hydrogen refueling dispensers (in session "Technical Sessions")

Development of an automated and self-validated approach to a data acquisition system and to data measurement (in session "Technical Sessions")

Development of an Open Source Testing Devices for Fuel Cell Vehicles (in session "Technical Sessions")

Development of an optical force balance for low mass at LNE-CNAM. (in session "Poster Session")

Development of automatic force measurement system (in session "Poster Session")

Development of Coconut Shell-Based Charcoal In-House Quality Control Material (IQCM) for Proximate Analysis in Solid Fuels (in session "Poster Session")

Development of Complementary Methodologies for Oxygen Barrier Assessment on Novel Packaging Using Fluorescent Decay and Gas Chromatography Technologies within Industrialization Environment (in session "Technical Sessions")

Development of digital calibration certificates for coordinate metrology applications (in session "Technical Sessions")

Development of Flow Measurement Standard for Cryogenic Fluids Using Liquid Nitrogen (in session "Poster Session")

DEVELOPMENT OF HIGH ACCURACY TORQUE STANDARD MACHINE IN CHINA (in session "Technical Sessions")

Development of Hydrogen Field Test Standard for Hydrogen Refueling Stations in Korea (in session "Technical Sessions")

Development of infrared absorption-based flow sensor for in-situ measurement of dispenser discharge amount (in session "Technical Sessions")

Development of Matrix Reference Material for Reliable Phenthoate Determination in Mango by Gas Chromatography-Nitrogen Phosphorus Detector (GC-NPD) and Gas Chromatography Tandem Mass Spectrometry (GC-MS/MS) (in session "Technical Sessions")

Development of measurement procedures for volume and flow related quantities in microfluidic devices (in session "Technical Sessions")

Development of measurement system of chiseling motion using sensor fusion technology (in session "Technical Sessions")

Development of miniaturised sensors for methane detection at trace levels for environmental monitoring applications (in session "Technical Sessions")

Development of real-environment vibration evaluation system for Infrastructure deterioration diagnosis (in session "Technical Sessions")

Development of Reference Materials: Homogeneity and Stability Assessment Based on the Determination of Chloramphenicol in Fish Muscle (in session "Technical Sessions")

Development of Self-Localization System Using Landmarks Recognition for Autonomous Transporter in Orchard (in session "Technical Sessions")

Development of small ball rebound hardness test method and the tester, eNM 1A10 . (in session "Poster Session")

Development of the density and viscosity measurement system for refrigerants (in session "Technical Sessions")

Development of traceable temperature measurement points in district heating pipe networks (in session "Technical Sessions")

Development of Transfer Standards for Traceability of Hardness Diamond Indenter Calibration Systems (in session "Technical Sessions")

Differentiation between Model Error and Measurement Uncertainty in Machine Learning Modeling for Measurement Processes (in session "Technical Sessions")

Digital Calibration Certificate (DCC): Creation, Validation and Data Extraction (in session "Technical Sessions")

Digital Calibration Certificate in a trusted quality infrastructure federated data space: a proof of concept (in session "Technical Sessions")

Digital calibration certificates and automated calibration workflow in the Vacuum Metrology Group of PTB (in session "Technical Sessions")

Digital Force Sensors and challenges for their calibration (in session "Technical Sessions")

DIGITAL INFRASTRUCTURE FOR MONITORING AND PREDICTIVE MAINTENANCE OF CMMS (in session "Poster Session")

Digital optimization in the design of a monitoring system to be installed in an archaeological heritage structure: The case of the Hera temple (Paestum, S Italy) (in session "Technical Sessions")

DIGITAL TO ANALOG CONVERTER BASED ON PULSE-WIDTH ADDING (in session "Technical Sessions")

Digital Transformation: Building an event driven electronic seal service within a cloud native metrological ecosystem (in session "Technical Sessions")

Digital Transformation: Ensuring Metrological Traceability (in session "Technical Sessions")

Digital Twin design of a 5 degrees of freedom industrial robotic arm for engineering education purposes (in session "Technical Sessions")

Digitalization in flow metrology - the digital calibration certificate (DCC) ensures the reliability of measurement results (in session "Technical Sessions")

Digitalization in the Metrology Quality Infrastructure – Perspectives from Novo Nordisk (in session "Technical Sessions")

Digitalization of a calibration laboratory: Batch Calibration (in session "Poster Session")

Digitalization of Basic Error and Measurement Uncertainty of Reference Meters by Utilizing Digital Calibration Certificate (DCC) (in session "Poster Session")

Digitalization of on site characteriaction of climatic chambers (in session "Poster Session")

DIGITALIZATION TECHNOLOGY BASED RESEARCH ON INTELLIGENT TEMPERATURE SENSING DEVICE FOR TRANSFORMERS (in session "Poster Session")

Digitalization, creation and implementation of digital calibration certificates (in session "Technical Sessions")

DIMENSIONAL AND GEOMETRICAL CHARACTERIZATION OF PLASTIC POWDER BED FUSION PARTS THROUGH COMPUTED TOMOGRAPHY (in session "Poster Session")

Dimensional calibration of small Critical Flow Venturi Nozzles (in session "Technical Sessions")

Direct current and low frequency measurement technology (in session "Technical Visits")

Discussion on indirect measurement and verification method of calorific value in energy metering of pipeline natural gas (in session "Poster Session")

Dissemination of the density unit using 1 kg spheres made of natural silicon by pressure-stabilized hydrostatic weighing (in session "Technical Sessions")

Dosimetry for radiotherapy (in session "Technical Visits")

Dosimetry for X-ray radiation (in session "Technical Visits")

Dosimetry for X-ray therapy (in session "Technical Visits")

DYNAMIC CALIBRATION OF ACQUISITION CARDS USED IN VIBRATION MEASUREMENTS, CONTRIBUTION OF THE THEORETICAL AND REAL RESOLUTION IN THE UNCERTAINTY BUDGET (in session "Poster Session")

Dynamic Calibration of Carrier Frequency Bridge Amplifiers (in session "Technical Sessions")

Dynamic Calibration of Instrumented Charpy Strikers (in session "Technical Sessions")

Dynamic metrology in practice: from concepts to calibration services (in session "Poster Session")

Dynamic pressure generation and measurement characteristics in a laser interferometry-based evaluation system for infrasound sensors (in session "Technical Sessions")

Ecologizing STEM education: Using Caliper to measure and manage for stakeholder empowerment (in session "Technical Sessions")

EFFECT OF FILLER CONCENTRATION ON THE THERMAL DIFFUSIVITY OF PLA/GRAPHENE NANOCOMPOSITES (in session "Poster Session")

Effects of the shock tube diameter on shock wave propagation in a diaphragmless shock tube (in session "Technical Sessions")

Electric Vehicles in Kenya: A Review of Quality Infrastructure (in session "Poster Session")

Electrical quantum standards (in session "Technical Visits")

Electromagnetic fields (in session "Technical Visits")

Emerging innovations in Health Metrology for diagnostic imaging (in session "Technical Sessions")

Enabling Efficient Uncertainty Evaluation of Time Gating Implemented in an Open-Source Python Package (in session "Technical Sessions")

End-to-end digital processes: From the Online Access Act to digital certificates (in session "Technical Sessions")

End-user case studies in sensor network metrology (in session "Technical Sessions")

Energy Consumption Analysis under Demand-Controlled Ventilation due to Drift of Indoor Air Quality Sensor (in session "Poster Session")

Enhancing Industrial IoT with Time Synchronization: Integrating PTP and gPTP for Metrology Networks in the factory of the future (in session "Technical Sessions")

Enhancing Interoperability in Digital Calibration: A Case for Ontology Development (in session "Technical Sessions")

Enhancing Metrology Standards in Kosovo: Recent Accreditation Achievements and Insights from the Pressure Laboratory (in session "Technical Sessions")

Enhancing Radar Engineering Education through FMCW Simulation Frameworks (in session "Technical Sessions")

Enhancing Simulation Credibility through Data Model Development: A Case Study Using NASA-STD-7009 (in session "Technical Sessions")

Enhancing the accuracy of specific heat measurement for refrigerants using a multi-zone temperature-controlled Calvet calorimeter (in session "Poster Session")

Enhancing the Interoperability of Electrical Quantities in Digital calibration certificate (in session "Technical Sessions")

Ensuring traceability by organizing the Metrological Measurements Network on examples of measurements magnitude and phase of the accelerometers’ complex sensitivity (in session "Technical Sessions")

Entanglement-based intercity Quantum Key Distribution: metrology and implementation. (in session "Technical Sessions")

Entrance Music (in session "Plenary")

Environmental radioactivity (in session "Technical Visits")

Establish an Information Integration and Data sharing Platform for National Quality Infrastructure (NQI) in China (in session "Technical Sessions")

Establishing SI-traceable on-site calibration of soil moisture sensors (in session "Technical Sessions")

Establishment of 100 kN·m Deadweight Torque Standard Machine at NIM (in session "Technical Sessions")

Establishment of gas flowmeter measurement database system based on SQL server and the application in turbine flowmeter accuracy reduction diagnosis (in session "Poster Session")

Establishment of Good Practices for the Usage of Machine-Actionable Core Metrological Terminology (in session "Technical Sessions")

Establishment of ISO/IEC/JTC 3, Quantum technologies (in session "Technical Sessions")

Establishment of National Standard Viscosity Scale at NMCC-SASO-Saudi Arabia (in session "Technical Sessions")

Establishment of web-based smart prototype platform to issue digital calibration certificate by employing GEMIMEG-Tool (in session "Technical Sessions")

Estimating the delay in wood chips feed to combustion power plant by both mathematical and visual aid (in session "Technical Sessions")

ESTIMATION OF FORCE ACTING ON ORAL CAVITY DURING CHEWING USING TONGUE SIMULATOR (in session "Poster Session")

ESTIMATION OF FORCE ACTING ON ORAL CAVITY DURING SWALLOWING USING TONGUE SIMULATOR (in session "Poster Session")

Estimation of Function Parameters through Iterated Linearization for Nonlinear Errors-in-Variable Regression with Correlated Variables (in session "Technical Sessions")

Estimation of the fractional frequency shift produced by the systematic physical phenomena of the National Time and Frequency Standard, base of the UTC scale (INM) in order to analyze the limitations in the stability of the Cesium Atomic Oscillator. (in session "Poster Session")

EURAMET 1601 Pilot study: Comparison of dynamic pressure measurements (in session "Poster Session")

European Metrology Network for Clean Energy (in session "Technical Sessions")

EUROPEAN METROLOGY NETWORK FOR RADIATION PROTECTION: QUALITY INFRASTRUCTURE FOR A STRONGER EUROPE (in session "Technical Sessions")

EUROPEAN PARTNERSHIP IN METROLOGY PROJECT: DISSEMINATION OF THE REDEFINED KELVIN (DIREK-T) (in session "Technical Sessions")

Evaluating probabilistically checkable proof in software update procedures and functional checks (in session "Technical Sessions")

Evaluation of Contactless Respiratory Rate Measurement: Thermography vs. rPPG (in session "Technical Sessions")

EVALUATION OF CRUSHING FORCE FOR COMPRESSION MOLDED PRODUCTS WITH OF LOW HARDNESS (in session "Poster Session")

Evaluation of Impaired Error Vector Magnitude Measurement Based on Monte Carlo Method (in session "Technical Sessions")

Evaluation of influencing factors in the realisation of dynamic flow profiles with cavitation nozzles (in session "Technical Sessions")

Evaluation of Physical Effort by IoT-Based Wearable Sensors (in session "Technical Sessions")

Evaluation of the influence of the surface dulling process on the result of coordinate optical measurement (in session "Technical Sessions")

EVALUATION OF THE LONG-TERM DRIFT OF HIGH PRECISION RESISTANCE MEASURES (in session "Poster Session")

Evaluation of uncertainty associated with totalisation of time-sampled data in gas quantity and energy measurements (in session "Technical Sessions")

Evaluation of Uncertainty due to Repeatable Measurements by Using Weighted Statistics (in session "Technical Sessions")

Evolution of Mass Metrology in Kenya – Recent updates and progress (in session "Poster Session")

EXACT: Towards a platform for empirically benchmarking machine learning model explanations (in session "Technical Sessions")

Experimental and Kinetic Modeling Study on Refrigerants: A Comparative Case Study on Methane and Difluoromethane (in session "Poster Session")

Experimental and numerical study of a flow meter under different diesel oil conditions (in session "Technical Sessions")

Experimental determination of sensitivity coefficients of main influence parameters in Rockwell B, C, 15N, 30N and 45N (in session "Technical Sessions")

Experimental investigation on accuracy of a Coriolis flowmeter in wide Reynolds number range by using various hydrocarbon liquids including LPG. (in session "Technical Sessions")

Experimental study for non-adiabatic wall conditions with a 3D printed temperature-controlled Aluminum Critical Flow Venturi Nozzle (in session "Technical Sessions")

Experimental study of dynamic periodic processes (in session "Technical Sessions")

Experimental study of the blockage effect of a vane anemometer in a small wind tunnel (in session "Technical Sessions")

Experimental verification of coil motion misalignment insensitivity in a Kibble balance (in session "Technical Sessions")

Exploration of Performance Testing Methods for Mass Flowmeters Used in Natural Gas Trade Measurement (in session "Poster Session")

EXPLORATION OF TRACEABILITY METHODS FOR MAGNETIC HEATING STIRRER (in session "Poster Session")

Exploring Fit Approaches for Pressure Calibration: An Interactive Web Application for Comparative Analysis (in session "Technical Sessions")

Exploring Student Engagement and Learning Preferences: A Comparative Study between Virtual and Robot-based Tutors (in session "Technical Sessions")

Explosion-protected drive systems (in session "Technical Visits")

EXTENSOMETER COMPARISON AMONG PROVINCES LABORATORIES IN CHINA (in session "Poster Session")

Extra-Fine Needle Deflection Modeling Considering Needle Stiffness and Tissue Resistance for Needle Tip Direction Control during Reinsertion in Robotic Needle Insertion (in session "Technical Sessions")

Fast tunable single-frequency Yb-doped fiber laser (in session "Technical Sessions")

Fault Simulation in Phasor Measurement Units: A Study on System Reaction Time in a 5G Network Environment (in session "Poster Session")

FEM analysis of thermal properties of optical gas cells for ro-vibrational spectroscopic thermometry (in session "Poster Session")

Femtosecond Pulse Beam for Precise Three-Degree-of-Freedom Pose Measurement (in session "Technical Sessions")

Field-axis measurement of an AC-powered magnet by a single stretched wire (in session "Technical Sessions")

Flexible Monte Carlo Method for Sensor Calibration (in session "Poster Session")

FLOMEKO (in session "Technical Visits")

for all Session Chairs (in session "Information")

for Session Chairs (in session "Information")

Force measuring technology (in session "Technical Visits")

Force signals time alignment using cross-correlation (in session "Poster Session")

Fortsetzung des Workshops (in session "Technical Visits")

Foundational Issues in Spectrum Measurement – Preliminary Considerations (in session "Technical Sessions")

From technical challenges pursued in development of ISO 10360-13 designed for performance evaluation of optical 3D CMS (in session "Technical Sessions")

Full-automatic calibration device for test joints of hydraulic impulse tools (in session "Poster Session")

Fundamental Research (in session "Technical Visits")

FURTHER INVESTIGATION ON THE MEASURING PERFORMANCE OF A COMBINATION METHOD OF A VOLUMETRIC POSITIVE-DISPLACEMENT FLOWMETER AND A DENSITOMETER IN MEASURING LIQUID FUEL MASS FLOW AT LOW FLOW RATES (in session "Technical Sessions")

Future-proofing digitalisation of a frequency measurement service (in session "Technical Sessions")

GaAs/AlGaAs Based Single-Electron Pumps for a Quantum Current Standard (in session "Technical Sessions")

Gala Dinner (in session "Social Event")

Gas analysis/ Properties of liquids (in session "Technical Visits")

Gas dynamic pressure standard using a step pressure generator (in session "Technical Sessions")

Gaussian processes and sensor calibration in sensor networks (in session "Technical Sessions")

GD&T Control Features input from 3D CAD to Metrology Software (in session "Poster Session")

GEMIMEG – Digitalization of Calibration Processes in Metrology (in session "Technical Sessions")

General and inorganic chemistry (in session "Technical Visits")

General developments in Force and Torque Metrology at PTB (in session "Poster Session")

General-purpose ultrasensitive dc SQUIDs with sub-micrometer circuit elements (in session "Poster Session")

Geodesy (in session "Technical Visits")

GLOBAL SENSITIVITY ANALYSIS AND APPLICATION FOR MEASURING SUB-MICRON HIGH ASPECT RATIO STRUCTURES BASED ON DUV SCATTEROMETRY (in session "Technical Sessions")

GOOD PIPETTING PRACTICE – A SCIENCE BASED APPROACH FOR QUALITY MANAGEMENT OF PIPETTES (in session "Technical Sessions")

Good practice definitions for DCCs on temperature and humidity quantities (in session "Technical Sessions")

Greetings Free and Hanseatic City of Hamburg (in session "Plenary")

Greetings from President and Music (in session "Social Event")

Greetings IMEKO Chair of Organizing Committee (in session "Plenary")

Greetings PTB (in session "Plenary")

Handling of Compressed Natural Gas Dispenser Trade Discrepancy Cases (in session "Poster Session")

Handover of the baton from the old to the new IMEKO President (in session "Social Event")

Hardness changes according to impact direction of impact device in the Leeb D type hardness test (in session "Poster Session")

Hardness metrology (in session "Technical Visits")

Harmonisation processes and practical implementation of machine-readable digital calibration certificates (in session "Technical Sessions")

Harmonizing Micro Crown Gear and Spur Gear Geometries: A Novel Approach for Quality Prediction through Analogous Transformation (in session "Technical Sessions")

Hashing It Out: Unravelling Data Threads in Digital Manufacturing (in session "Technical Sessions")

High precision tip-based nanofabrication and nanometrology in macroscopic working areas using planar nanopositioning technology (in session "Technical Sessions")

High voltagemeasurement technology (in session "Technical Visits")

High-Frequency Base Quantities (in session "Technical Visits")

High-Frequency Impedance Spectroscopy of TiO2 Nanotubes: Perspective for a Multiparametric Characterization with Nanoelectrode Array Sensor (in session "Technical Sessions")

High-Pressure Hydrogen Flow Metering Standards (in session "Technical Sessions")

High-sensitivity imaging of current distribution inside Li-ion battery with a commercial OPM sensor (in session "Technical Sessions")

Hollow-Core Fiber based DNA sensor (in session "Technical Sessions")

Human Presence and Motion Detection through Electrostatic Sensing (in session "Technical Sessions")

Hybrid AI-PID Control for Precision Metrology (in session "Technical Sessions")

Hybrid EEG-EMG Control Scheme for Multiple Degrees of Freedom Upper-Limb Prosthesis (in session "Technical Sessions")

Hybrid method combining SEM and AFM in reference metrology for characterization of the instrument transfer function using CCS material measure (in session "Poster Session")

Hysteresis Curve Model of Precision Reducers in Robots and Its Application in Lost Motion Evaluation (in session "Technical Sessions")

Ideas for the transition from paper-based force and torque calibration certificates to machine-readable XML data (in session "Technical Sessions")

Identification of Baled Materials using a Capacitive Sensor (in session "Technical Sessions")

Identification of localization ability and head motion strategy for static and dynamic sound sources in blind soccer players using a virtual spatial acoustic system (in session "Technical Sessions")

ILC investigation and In-field traceability using a high sensitivity & high mass geophone set (in session "Technical Sessions")

IMEKO Organization (in session "Technical Sessions")

IMEKO Awards (in session "Social Event")

IMEKO President (in session "Technical Visits")

Impact of cellularity in the flame front on the burning velocity of ethanol/air flame in Constant Volume Combustion Bomb (in session "Poster Session")

Impedance spectroscopy for tooth demineralisation assessment (in session "Technical Sessions")

Implementation of a computer tool for the characterization of the cesium atomic oscillator National time and frequency standard used in the generation of the UTC(INM) time scale. (in session "Poster Session")

Implementation of Dissemination of Unit of Mass in Emerging Mass Laboratories (in session "Technical Sessions")

IMPLEMENTATION OF METROFOOD SERVICES IN THE BELGIUM NODE (in session "Technical Sessions")

Implementing OM-BR Digital Certificates in Smart Meters in Brazil (in session "Technical Sessions")

Implementing Transfer Learning for Sound Event Classification using the ReaLISED Audio Database (in session "Poster Session")

IMPROVED DYNAMIC BRIDGE STANDARD AS UNIVERSAL TOOL FOR BRIDGE AMPLIFIER CHARACTERISATION AND CALIBRATION (in session "Technical Sessions")

Improved measurement of residual vacuum in absolute pressure mode of pressure balances (in session "Poster Session")

Improvement and priliminary test of gravimetric primary facility for natural gas up to 60bar (in session "Technical Sessions")

Improvement of geometric product specification through a priori estimation of uncertainty of CMM measurements (in session "Technical Sessions")

Improvements in the Calibration of Barometers Using in Large Size Barometric Chamber by Enhancing Measurement and Control Processes in Atmospheric Pressure Calibration through Collaborative Efforts between INM (CO) and IDEAM in Colombia (in session "Technical Sessions")

IMPROVING PROCEDURES FOR THE EXPANDED UNCERTAINTY EVALUATION AT CALIBRATING MEASURING INSTRUMENTS (in session "Technical Sessions")

In-Situ Impedance Analysis of QCM Sensors during Black Metal Deposition Using an Advanced BVD Fitting Algorithm (in session "Technical Sessions")

In-situ Verification Technique for Measuring Performance of Large-Caliber Flowmeters in Heating Systems Based on Common Elbows (in session "Poster Session")

Industrial Metrology (in session "Technical Visits")

Influence analysis of the gas purity on NEGP adsorption performance testing (in session "Technical Sessions")

INFLUENCE OF INSTRUMENT MANUFACTURER AND MODEL TYPE ON BRAIN VOLUME MEASUREMENTS WHEN DIAGNOSING NEURODEGENERATION (in session "Technical Sessions")

Influence of liquid media separators on pressure calibrations and high-pressure experiments (in session "Technical Sessions")

Influence of rainfall time series sample rate in the improvement of decision-making based on high intensity rainfall events (in session "Technical Sessions")

Influence of Scanning Strategies on Dimensional Accuracy in Laser Powder Bed Fusion (in session "Technical Sessions")

Influence of square drive connections to the calibration of torque wrenches (in session "Poster Session")

Influences of Sampling Time Deviations in Dynamic Measurements with Digital Sensors: Mitigating Signal Integrity Degradation (in session "Technical Sessions")

Information by the Organizer (in session "Social Event")

Information from Organizer and the IMEKO President (in session "Plenary")

INITIAL STEPS TOWARD A METROLOGICAL MODEL FOR ASSESSING WELL-BEING IN OFFICE SPACES (in session "Technical Sessions")

Initial Study of Linking Quartz Crystal Microbalance Sensed Nanograms to Laser Power (in session "Technical Sessions")

Initial tests of a wearable carbon dioxide transducer for air quality analysis in indoor environments from the perspective of occupational safety (in session "Poster Session")

Inmetro's Product Safety Laboratory in support of Quality Infrastructure in Brazil (in session "Technical Sessions")

Innovative mechanical sensors architectures and their physics applications (in session "Technical Sessions")

Integrated detection optics for scalable ion-traps for Quantum Technologies (in session "Technical Sessions")

Intelligent design and application of high pressure real flow calibration system (in session "Poster Session")

Interferometry on gauge blocks (in session "Technical Visits")

Interferometry on spheres (in session "Technical Visits")

Interlaboratory Comparison on the verification Fuel Distributor Measurement Systems (in session "Technical Sessions")

Internal diameter determination in conical glassware: a comparative analysis of measurement methods (in session "Technical Sessions")

International Program Committee (IPC) (in session "Technical Sessions")

Interpreting SI notation for units and dimensions (in session "Technical Sessions")

Investigation of Electronic Water Meter Performance Testing and Design of a Novel Water Meter Laboratory (in session "Technical Sessions")

Investigation of the influence of measurement duration on results of resistance bridge ratio error assessment (in session "Technical Sessions")

Investigation of the measurement distance for an UAV-performed radiation pattern measurement (in session "Technical Sessions")

Investigation of the Measurement Uncertainty of the Potential Drop Method for Structural Health Monitoring (in session "Poster Session")

INVESTIGATION OF THE PERFORMANCE OF AN ORIFICE PLATE FLOWMETER UNDER TRANSIENT CONDITIONS FOR LIQUID FUELS (in session "Technical Sessions")

Investigation on uncertainty in broadband seismometer calibration below 0.1 Hz (in session "Technical Sessions")

Investigations on the performance of a newly developed pressure-driven flow controller used in microfluidic applications (in session "Technical Sessions")

IoT-based Energy Monitoring in Industrial Production (in session "Technical Sessions")

ISO TS 6737: The first standardised vacuum gauge (in session "Technical Sessions")

JCGM 101-COMPLIANT UNCERTAINTY EVALUATION USING VIRTUAL EXPERIMENTS (in session "Technical Sessions")

Joint TC WG Digitalization (in session "Technical Sessions")

Keeping track of evaporating solutions to maintain traceability (in session "Technical Sessions")

Kessler truck (in session "Technical Visits")

Keynote: Klaus von Klitzing, Nobel Prize 1985 (in session "Social Event")

LabMate: supporting types for MATLAB (in session "Technical Sessions")

Laborprogramm 1.4 + 1.5 (in session "Technical Visits")

Learning Sensordatafusion, an practical approach (in session "Technical Sessions")

Lecture program: Prof Mehlstäubler Prof Ospelkaus Prof Surzhykov (in session "Technical Visits")

LEGAL METROLOGY FOR QUALITY INFRAESTRUCTURE IN BRAZIL: CONTRIBUTIONS OF THE SANTA CATARINA METROLOGY INSTITUTE (in session "Poster Session")

Life Sciences (in session "Technical Visits")

Line laser measurement, evaluation and utilization of holistic gear deviations (in session "Technical Sessions")

Linking aircraft mechanical testing data through semantic technologies (in session "Technical Sessions")

LorisQ use of PTB-style DCCs for digital transformation of measuring and test equipment management (in session "Technical Sessions")

Lunch (in session "Technical Visits")

Machine learning model with Bayesian optimization for ultrasonic flowmeter in-use measurement (in session "Technical Sessions")

MAGNETIC MEASUREMENT TRACEABILITY AT CEM (in session "Poster Session")

Magnetic measurements (in session "Technical Visits")

MaritimeMET: Metrology for Green Maritime Shipping - Emission control through traceable measurements and machine learning approaches (in session "Poster Session")

Market Surveillance of Regulated Products: the use of x-ray fluorescence for heavy metals analysis (in session "Technical Sessions")

Mass and scales (in session "Technical Visits")

Mass Flow Rate Measurement of Pneumatically Conveyed Particles Based on Power Spectral Density Distribution of Electrostatic Signals (in session "Poster Session")

MATHEMATICAL MODEL OF MASS MEASUREMENT SYSTEM WITH CONSIDERATION OF FULCRUM POINT POSITION SHIFT AND ITS EVALUATION (in session "Poster Session")

Measurement of Flame Characteristics of Hydrogen Lancing in Natural Gas Boiler Burner (in session "Technical Sessions")

Measurement of forces and velocities during mechanical experiments with linear motors at intermediate strain rates (in session "Technical Sessions")

Measurement of Moisture and Temperature Distributions in a Biomass Silo through Capacitive and Acoustic Tomography (in session "Technical Sessions")

Measurement of optical fiber bending stiffness (in session "Technical Sessions")

Measurement of polarization dependent losses using two-photon interference (in session "Technical Sessions")

Measurement of the Venting Carbon Dioxide Through Venturi Flow Meter (in session "Technical Sessions")

Measurement uncertainty budget of a 5 MN·m-torque standard machine (in session "Poster Session")

Measurement Uncertainty Evaluation and Comparison Verification of High Precision and Large Torque Standard Machine (in session "Poster Session")

Measurement uncertainty of spectrophotometric determination of Ethanol in water (in session "Poster Session")

Measurements of the electromagnetic emissions for a class of special mobile robots (in session "Technical Sessions")

MEASURING AND EVALUATING THE PERFORMANCE OF INNOVATION INTERMEDIARIES: PROPOSITION OF RD&I INDICATORS BASED ON THE THEORY OF CHANGE (TOC) (in session "Poster Session")

Meet & greet the star of "The Last Artifact" (in session "Social Event")

Method for molar mass correction of a sonic nozzle (in session "Poster Session")

METHOD OF NON-CONTACT MEASUREMENT FOR LENS THICKNESS USING ASTIGMATIC AUTO-FOCUS PROBE (in session "Technical Sessions")

Method with Changing Variables for Fitting a Nonlinear Function to Measurement Data and Its Uncertainty Band (in session "Technical Sessions")

Methods for Improving the Accuracy of Digital-to-Analog Converters (in session "Technical Sessions")

Metrological Characterisation of the new 5 MN·m Standard Torque Machine as a Force Reference Calibration Machine (in session "Technical Sessions")

Metrological Characterization of the (0.2~100) N Deadweight Force Standard Machine with Digital Twin (in session "Poster Session")

Metrological self-checking and self-diagnosing as a characteristic feature of automated production development in the era of Industry 4.0 (in session "Technical Sessions")

Metrological Traceability for the Absolute Gravity Italian Network (in session "Poster Session")

Metrological traceability path for marine pCO2 measurement results (in session "Technical Sessions")

Metrological Validation of the Unreal Gaming Engine for Type Testing of Traffic Monitoring Devices (in session "Technical Sessions")

Metrology and the Quality Infrastructure for The Digital Product Passport (in session "Technical Sessions")

METROLOGY FOR ARTIFICIAL INTELLIGENCE IN MEDICINE (in session "Technical Sessions")

Metrology for climate action (in session "Technical Sessions")

Metrology for the second quantum revolution (in session "Technical Sessions")

METROLOGY IN THE QUANTUM ERA: PERSPECTIVES ON THE EURAMET EUROPEAN METROLOGY NETWORK FOR QUANTUM TECHNOLOGIES (in session "Technical Sessions")

Metrology of power loss in electrical sheets to 5 kHz (in session "Poster Session")

METROLOGY PERSONNEL COMPETENCIES. THEIR IMPORTANCE TO THE QUALITY OF MEASUREMENTS (in session "Poster Session")

Metrology to determine ammonia impurities in emerging applications: CCUS-CO2, Biomethane and H2 (in session "Technical Sessions")

Metrology, embedded systems and IoT in engineering education (in session "Poster Session")

Metrology: Understanding and Shaping the World – in a Digital and Interconnected Future (in session "Keynote")

MetSuperCap: Metrology for static and dynamic characterisation of supercapacitors (in session "Poster Session")

MICROBIOLOGICAL PROFICIENCY TESTING: ESTABLISHING A FIXED STANDARD DEVIATION FOR PROFICIENCY ASSESSMENT. (in session "Technical Sessions")

MICROPLASTICS DETECTION WITHMICROFLUIDICS INTEGRATED WITH A MICROWAVE SENSOR (in session "Poster Session")

Miro Torque Calibration and Measurement device for Specialized Electromagnetic Components of inertial navigation system (in session "Poster Session")

Mittagessen (in session "Technical Visits")

Mobile accuracy testing of electric vehicle supply equipment (in session "Technical Sessions")

MODEL FOR SUPPLIER SELECTION OF BIG DATA TECHNOLOGY INFRASTRUCTURES FOR SCIENCE AND TECHNOLOGY INSTITUTIONS: QUALITY REQUIREMENTS AND METRICS (in session "Poster Session")

Modeling and Measurement of Volumetric Error for Linear Motion Stages (in session "Technical Sessions")

Modelling and determining correlations in sensor networks (in session "Technical Sessions")

Modelling of measuring systems - from white-box models to data-based approaches (in session "Technical Sessions")

Modernisation of PTB's AC Power Primary Standard (in session "Technical Sessions")

Modification of Calibration Procedure to Provide More Accurate Density Measurement (in session "Technical Sessions")

Modified uncertainty analysis for the accurate micropipettes calibration using primary gravimetric method (in session "Technical Sessions")

Molecule-Scale Resolution and Dynamics in Fluorescence Microscopy (in session "Keynote")

Monte Carlo Method for the Calibration and Measurement Capability Uncertainty of a Water Flow Standard System (in session "Technical Sessions")

Movie Night (in session "Social Event")

Multi-modal GMI applications with annealed nanocrystalline core (in session "Technical Sessions")

Multicomponent Calibration of Forces and Moments - an Overview of the various Technical Approaches (in session "Poster Session")

Multimodal 3D Imaging and Colour-FDM Printing Guide (in session "Technical Sessions")

Multimodal Fusion for Real-Time Gesture Recognition: A MediaPipe-Based Approach with Hand Normalization and Point Cloud Analysis (in session "Technical Sessions")

Multiphase Flow Measurement of Wet Gas Flow Using Machine Learning Modelling Algorithms (in session "Technical Sessions")

Multistage dynamic dilution systems – achievable uncertainties and practical aspects (in session "Poster Session")

Nanomechanical characterisation of vertical nanowires used for energy harvesting (in session "Technical Sessions")

Nanometercomparator (in session "Technical Visits")

Nanometre comparator (in session "Technical Visits")

Nanowire Gas Sensors: Understanding Surface Interactions and Sensing Performance (in session "Poster Session")

National Research Data Infrastructure (nfdi) (in session "Keynote")

Neutron radiation (in session "Technical Visits")

New approach for a non-linear/multi-dimensional calibration method for dynamic forces materials testing machines (in session "Technical Sessions")

New approach to organization of interlaboratory comparisons on calibration of climatic chambers (in session "Technical Sessions")

New Approach to Processing of Dynamic Measuring Data Based on Self-regularization (in session "Technical Sessions")

New capabilities for the realisation and the dissemination of the kelvin at high temperature in Europe (in session "Technical Sessions")

New challenges in Metrology for Health: looking for reliable diagnosis in electrocardiography and blood pressure measurement (in session "Technical Sessions")

New laboratory extension and development for mechatronics education (in session "Technical Sessions")

New Sartorius mass comparator for highest accuracy including fully automatic vacuum transfer unit (in session "Technical Sessions")

New SWIR hyperspectral diffraction imaging for OCD metrology of high aspect ratio submicron structures (in session "Technical Sessions")

Next-generation temperature metrology enabled by integrated photonics (in session "Technical Sessions")

Niedersachsen Quantum Communications Testbed (in session "Technical Sessions")

NIST on a Chip, Quantum Based Sensors for the Pascal and the Changing Role of the NMI (in session "Technical Sessions")

No Gala Dinner scheduled (in session "Social Event")

No Get Together scheduled (in session "Social Event")

No PTB Visit scheduled (in session "Technical Visits")

No Technical Visit scheduled (in session "Technical Visits")

No Welcome Reception scheduled (in session "Social Event")

Noise measuring technology (in session "Technical Visits")

Non-Linear Air Pressure Sensitivity of Angle Metrology with Autocollimators (in session "Technical Sessions")

Novel bottom-up traceability approach for calibrating geometries of tactile probes in dimensional metrology (in session "Technical Sessions")

Novel broadband spectral reflectometry for multi-critical dimension metrology of HAR sub-micrometer trench structures (in session "Technical Sessions")

Novel methods of testing for measurement of natural gas and hydrogen mixtures (THOTH2) (in session "Technical Sessions")

Novel primary standard for dynamic pressure up to 500 MPa (in session "Technical Sessions")

Numerical study of the influence of inlet turbulence intensity, wall roughness, and heat transfer in toroidal and cylindrical sonic nozzles (in session "Technical Sessions")

NV-based quantum sensor detect local temperature variations associated with changes in neuronal firing (in session "Technical Sessions")

Observation of aircraft ground performance with multicamera video monitoring system (in session "Poster Session")

ON THE CALIBRATION OF LASER-DOPPLER-VIBROMETER USING SIMULATED EXCITATION (in session "Technical Sessions")

ON THE DETERMINATION OF A PISTON PROVER DEAD VOLUME (in session "Technical Sessions")

On the influence of uncertainty in risk analysis based on digital models (in session "Technical Sessions")

On the meaning of sensitivity amid digital transformation (in session "Technical Sessions")

On-site calibration of a broadband seismometer (in session "Technical Sessions")

One-shot Polarization Interferometry for Measurement of Surface Profile (in session "Technical Sessions")

Online impedance estimation of induction motor coils using a CS-based measurement method (in session "Technical Sessions")

Online Instantaneous Angular Speed Estimation from Vibration Data on Low-Power Embedded Systems Evaluated on a Gas Foil Bearing (in session "Technical Sessions")

Online Monitoring of Erosion of Coriolis Flowmeter Tubes for Slurry Flow Measurement through Acoustic Emission Sensing and Stiffness Analysis (in session "Technical Sessions")

Open Bars (in session "Social Event")

Opening Helmholtz Award Ceremony and Music (in session "Social Event")

Opening IMEKO President (in session "Plenary")

Optical clocks (in session "Technical Visits")

Optical grid clocks (in session "Technical Visits")

Optical lattice clocks (in session "Technical Visits")

Optical Metrology and Simulation in 3D IC Technology: TSV Analysis and Semiconductor Doping (in session "Technical Sessions")

Optimised data synchronisation methods for continuous force calibration (in session "Technical Sessions")

Optimization of Meteorological Correction Formula for Total Station (in session "Technical Sessions")

Outline of sinusoidal force generation and measurement system to be installed at NMIJ (in session "Poster Session")

Overview of Current Trends in the Development of Ultrasonic Gas Flow Meters (in session "Technical Sessions")

Painting Robot Trajectory Planning for L-shaped Surfaces using High-Precision Paint Deposition Modeling (in session "Technical Sessions")

Parameters Affecting the Reliability of Sampling During the Assessment of the Purity of Hydrogen Used as a Vehicle Fuel (in session "Poster Session")

Participation of Latin American women in metrology: challenges and opportunities in industry and research/academia (in session "Workshop")

Particle measurements (in session "Technical Visits")

PECULIARITIES OF FORMATION AND CHECKING OF THE ACCREDITATION SCOPE OF CALIBRATION LABORATORY (in session "Technical Sessions")

Performance evaluation of a compact and flexible shearography device formed by an adapted commercial still camera (in session "Technical Sessions")

Performance evaluation of a Coriolis flowmeter for measuring mass flow rate of CO2 with impurities under CCS conditions (in session "Technical Sessions")

Performance of flare gas ultrasonic flow metering at high CO2 flows (in session "Technical Sessions")

Performance of the GraTESt Flow Facility After Extensive Modernisation (in session "Technical Sessions")

Performance Testing of Gas Flow Meters with Renewable Energy Gases (in session "Technical Sessions")

Philippines’ Success in Interlaboratory Comparisons of Nanoparticle Geometric Size Measurements (in session "Technical Sessions")

Photo Helmholtz Prize Winners (in session "Social Event")

Photometric Switching and Modulation Meter of Luminescent Radiation Intensity (in session "Technical Sessions")

Photometry/Spectroradiometry (in session "Technical Visits")

Physical chemistry for energy sources (in session "Technical Visits")

Physical ignition processes (in session "Technical Visits")

Piktor-o-bot: Integrated Image Processing Algorithms for Portrait Drawing Robot Applications (in session "Technical Sessions")

Pilot Study Comparison of Developed and Improved Mass Scale Measurement CapabilitiesES (in session "Technical Sessions")

PRACTICAL ASPECTS OF ENSURING OF THE METROLOGICAL TRACEABILITY (in session "Poster Session")

Pre-Registration & Get-Together (in session "Social Event")

Precision Roughness Measurement of Smooth Surface Utilizing Spin-Orbit Interaction of Light (in session "Technical Sessions")

PREDICTING PRESSURE STEP AND SHOCK FRONT SPEED IN DYNAMIC PRESSURE CALIBRATION USING A SHOCK TUBE BY CFD METHOD (in session "Technical Sessions")

Preparation of microfabricated alkali atomic vapor cells with good hermeticity (in session "Technical Sessions")

Presentation of the new EMP 23RPT03 Project “Metrology for standardised moisture content measurement in plant origin bulk materials in support of International and European food safety and trade – GrainMet” (in session "Technical Sessions")

Presentation of the XXV IMEKO World Congress in 2027 (in session "Social Event")

Preserving model structure and constraints in scientific computing (in session "Technical Sessions")

Primary calibration of seismic sensors down to 8 mHz – challenges regarding the straightness of shaker bearings (in session "Technical Sessions")

Primary calibration of shock transducers on a hammer-anvil shock exciter up to 100 000 m/s2 (in session "Technical Sessions")

PRIMARY HIGH SHOCK GENERATOR WITH FAST AND STRONG LINEAR MOTOR DRIVE FOR ACCELEROMETER CALIBRATIONS (in session "Technical Sessions")

Primary Tesla standard based on 3He (in session "Poster Session")

Programming and control challenges of the portrait drawing Piktor-o-bot (in session "Technical Sessions")

Project on a fully automated evaluation of a virtual mass comparison using the Digital Calibration Certificate (DCC) schema (in session "Technical Sessions")

Project QuAHMET on Quantum Anomalous Hall Effect Materials and Devices for Metrology (in session "Poster Session")

Providing FAIR Sensor Data Models Using Semantic Web-Technologies and Ontologies (in session "Technical Sessions")

PTB’s new system for calibrating power measurement devices at frequencies of up to 150 kHz (in session "Technical Sessions")

Pulse driven quantized current steps in ultrasmall Josephson junctions (in session "Technical Sessions")

Python-based development libraries and Web Applications to process and store data using a JSON representation XML-DCC. (in session "Technical Sessions")

Quality Assessment of Laboratory Activities in Professional Education Institutions: A Metrological Approach Based on Lean Thinking (in session "Poster Session")

Quality metrics for measurement uncertainty affected by the number of projections in xCT-based dimensional metrology (in session "Technical Sessions")

Quantitative Imaging: Propagating Uncertainty Through the Image Processing Pipeline (in session "Technical Sessions")

Quantitative Measurement of Burner Flame Stability through Spectroscopic Analysis (in session "Technical Sessions")

Quantum mechanics and the Kibble Principle – two ingredients for traceable mass and torque measurements (in session "Technical Sessions")

Quantum sensing for biomedical applications (in session "Technical Sessions")

Quantum Technology Standardization in Europe – A Short Review on Recent Activities (in session "Technical Sessions")

Raman spectroscopy for sweat analysis (in session "Technical Sessions")

Rasch Model and Anchoring Vignettes for Metrological Characterization of a Democracy Measuring System: Preliminary Studies (in session "Technical Sessions")

Raster Scan Imaging in Atomic Force Microscopy: new Perspectives and Potential of using Signal and System Theory (in session "Technical Sessions")

Realisation of the liquid pressure scale from 0.5 MPa to 1.6 GPa at PTB (in session "Technical Sessions")

Realization and dissemination of mass through the Consensus Value of the kilogram and preparation for the final phase of traceability to independent realizations (in session "Technical Sessions")

Realization of a Ultra-stable Audio Frequency Electrical Power Calibrator (in session "Poster Session")

Realization of acceleration (in session "Technical Visits")

Realization of Acceleration (in session "Technical Visits")

Realization of the Pascal Based on Helium and Argon Using an Invar-based Fabry-Perot Refractometer at 1550 nm. (in session "Technical Sessions")

Realization of Torque (in session "Technical Visits")

Realization of torque (in session "Technical Visits")

Realization of Torque (in session "Technical Visits")

RECENT PROGRESS IN OPTICAL NANOMETROLOGY FOR SEMICONDUCTOR INDUSTRY (in session "Poster Session")

Reconfigurable measurement setup for laboratory activities in Augmented Reality (in session "Technical Sessions")

Reducing temperature instabilities with additively manufactured parts (in session "Poster Session")

Reference samples for traceable outgassing rate measurements of hydrocarbons and water (in session "Technical Sessions")

Reference wall (in session "Technical Visits")

Reliability Analysis of Algorithms on a Desk Quantum Computer (in session "Technical Sessions")

RELIABILITY OF DYSLEXIA DATA, AND IMPACT OF PATIENT'S EEG SIGNAL PEAKS (in session "Technical Sessions")

Report on the comparison between KRISS 5 MN hydraulic amplification force machine and 1 MN deadweight force machine (in session "Poster Session")

Reproducibility related to machine learning assisted measurements (in session "Technical Sessions")

Research Advance in Cold-Atom Gravimeter (in session "Technical Sessions")

Research and Discussion on Traceability of Force Values for Large Range Force Standard Machines (in session "Poster Session")

Research Infrastructure Open Access Approach – Implementation Challenges and Solutions for Accredited Calibration Laboratories (in session "Technical Sessions")

Research on a self-centering device for mass comparator (in session "Technical Sessions")

Research on a Volume Determination method: Double Weighing in air (in session "Technical Sessions")

Research on Air Circulation System for Calibrating Gas Flowmeters Used Under Different Pressure and Temperature Conditions (in session "Technical Sessions")

Research on Brinell Hardness Measurement Method Based on Three-dimensional Point Cloud Data (in session "Technical Sessions")

Research on Calibration Parameters of Hydraulic Impulse Wrench (in session "Poster Session")

Research on calibration technology for ultralow vacuum leak rate based on different tracer gases (in session "Technical Sessions")

Research on data processing method of multi-spectral temperature field measurement device based on quartile-frame transient imaging (in session "Poster Session")

Research on Data Processing Methods for Intelligent Testing System of Automatic Instruments for Weighing Road Vehicles in Motion (in session "Poster Session")

Research on Fast and Very Small Liquid Flow Measurement Method Based on Machine Vision (in session "Poster Session")

Research on flow sensing method based on laminar flow element with micro-curved surface (in session "Technical Sessions")

Research on new power system load frequency control based on improved Sparrow Search algorithm. (in session "Poster Session")

Research on online measurement technology for diameter with large length-diameter ratio of HPPP (in session "Technical Sessions")

Research on remote intelligent control method for digital noise analyzer on-line detection (in session "Poster Session")

Research on Simulation Extrapolation Estimation Method in Large-Scale Torque Measurement Scene (in session "Poster Session")

RESEARCH ON STEADY STATE SYSTEM OF CLOSED LOOP NATURAL GAS FLOW FACILITY (in session "Poster Session")

Research on Testing Technology for Ultra Low Thermal Expansion Coefficient (in session "Poster Session")

Research on the Measurement Accuracy of Nulling and Non Nulling Stack S-type Pitot Tubes (in session "Technical Sessions")

Research on the quantitative relationship between laser beam offset displacement and the maximum acceptable tilt angle of point autofocus microscopy (in session "Technical Sessions")

Research on time-frequency transmission and monitoring technology based on low-voltage power line carrier communication (in session "Poster Session")

Research on time-stretching technology based on Femtosecond optical frequency comb in the field of velocimetry and blade tip clearance measurement (in session "Technical Sessions")

Research on Turbine Blade Surface Temperature Field Measurement System Based on Multi-Spectrum (in session "Poster Session")

RESEARCH ON UNSTEADY READING MODE AND INTELLIGENT CALIBRATION ALGORITHM OF FORCE METER (in session "Poster Session")

Research to support the energy transition: Metrology for the expansion of wind energy in Germany (in session "Technical Sessions")

Resolution Adjustable TDLAS Tomography of Axisymmetric Flame Temperature by using a Single Photodiode (in session "Poster Session")

Robust Performance Assessment Protocol to Benchmark and Characterise Analytical Systems Used in the Biomethane Conformity Assessment and Trial Applications (in session "Poster Session")

Roughness and crystalline standards (in session "Technical Visits")

Safety Characteristics in Explosion Protection (in session "Technical Visits")

Sample transfer function estimation of high-frequency elastic waves using hopkinson bar (in session "Technical Sessions")

Scaled Test Bench for the Measurement of a Hybrid Full-Electric Powertrain Efficiency (in session "Poster Session")

ScaleIT, a new perspective 5.0 for the world of weighing: remote calibration and remote sealing in a hybrid solution. (in session "Technical Sessions")

Scanning Deflectometry Profiler based on self-calibrating rotary encoder (in session "Poster Session")

Scientific instrumentation (in session "Technical Visits")

Secondary calibration using Gabrielsons method & COPA with background noise at a laboratory facility (in session "Technical Sessions")

SENSITIVITY CALIBRATION FOR MASS COMPARATOR BASED ON OPTICAL FORCE (in session "Poster Session")

SENSOR FAULT DIAGNOSIS USING PRINCIPAL COMPONENT ANALYSIS AND CONVOLUTIONAL NEURAL NETWORK FOR OFFSHORE STRUCTURAL HEALTH MONITORING (in session "Technical Sessions")

Sensor Network Metrology: Current State and Future Directions (in session "Technical Sessions")

Setting up a new, reliable, and traceable current output specification for a Rotamass TI Coriolis mass flow meter by applying JCGM 100:2008 (in session "Technical Sessions")

Signing of the MoU SIM - IMEKO (in session "Technical Sessions")

SIMULATION AND ANALYSIS ON DUAL-PLANE LINEAR ARRAY ELECTROMAGNETIC TOMOGRAPHY (in session "Technical Sessions")

Simulation Framework for Electrical Impedance Tomography Systems (in session "Technical Sessions")

Simulation of the flow of the heat exchanger working fluid: subsidies for optimizing the construction design of an online cleaning device (in session "Technical Sessions")

Simultaneous measurement of surface geometry and film thickness distribution by retroreflex ellipsometry (in session "Technical Sessions")

Simultaneous Measurement of the Rotational Speed and Clearance of a Metallic Rotor Using Electret-based Electrostatic Sensors (in session "Technical Sessions")

Sinewave Frequency Estimation Based on Fractional Interpolated Discrete Fourier Transform (in session "Poster Session")

Single electron pumps (in session "Technical Visits")

Software tools for smarter testing in the aerospace industry (in session "Technical Sessions")

Solar cells (in session "Technical Visits")

Solar modules (in session "Technical Visits")

Solid state density and Planck balance (in session "Technical Visits")

Soliton microcomb-assisted microring photonic thermometer with ultra-high resolution and broad range (in session "Technical Sessions")

Solketal’s Energy Exploration: Mass Spectrometry-Informed Plug Flow Reactor Studies and Reaction Mechanism Generation using RMG (in session "Poster Session")

Speckle interferometry in polar and cylindrical coordinates: configurations and engineering applications (in session "Technical Sessions")

Spectral Method for Acoustic Impulse Events Localization based on Time Difference of Arrival (in session "Technical Sessions")

Sphericity measurement / MTF measurement (in session "Technical Visits")

Stabilisation time after cleaning with alcohol sheet and OIML shape weights (in session "Technical Sessions")

Standard photoelectric pyromete (in session "Poster Session")

STANDARD PHOTONIC (QUANTUM) THERMOMETRY IN THE UK (in session "Technical Sessions")

Static and Dynamic: Solutions of Pressure Measurement for Industry (in session "Technical Sessions")

Static, continuous and dynamic calibration of force transducers: a comparative study on a low-force strain-gauge measuring device (in session "Technical Sessions")

STATUS OF THE KILOGRAM REALISATION USING THE XRCD-METHOD AT PTB (in session "Technical Sessions")

Stefan Hell, Nobel Prize 2014 (in session "Social Event")

Streamlining Conformity Assessment of Software applying Large Language Models (in session "Technical Sessions")

Study of Improved Standard Machine on Shore hardness (in session "Technical Sessions")

Study on evaluation method for health status of natural gas ultrasonic flowmeter (in session "Poster Session")

Study on Force Transducers Dynamic Calibration according to Sinusoidal Method (in session "Poster Session")

Study on Haptic Sensors for Robotic Palpation -Verification of Force and Acceleration Acquisition Frequency-Bands for Identifying Softness in Dermatological Examination- (in session "Technical Sessions")

Study on Shock Tube Calibration Technology Under Low Pressure (in session "Poster Session")

Study on the 30 MN Force Calibration System in Tension with Failure Protection (in session "Poster Session")

Study on the Dynamic Characteristics of Gas-Liquid Mixing Phenomenon in Pressure Pipeline (in session "Poster Session")

Study on the Impact of Field Test Conditions on the Measurement Results of Clamped-On Gas Ultrasonic Flowmeter (in session "Technical Sessions")

STUDY ON THE INFLUENCE OF GAS PRESSURE PULSATION IN CLOSED CONDUITS ON ULTRASONIC FLOW MEASUREMENT AND EXPERIMENTAL METHOD (in session "Poster Session")

Study on the influence of mass measurement under air and vacuum conditions (in session "Technical Sessions")

STUDY ON THE TORSIONAL VIBRATION CALIBRATION MACHINE WITH THE ECCENTRIC SHAFTS (in session "Technical Sessions")

Study on the Use of ChatGPT for Generating Code for Web-Based Augmented Reality Applications (in session "Technical Sessions")

Study to compare different transmission procedures in the context of a robotic telemanipulation system (in session "Technical Sessions")

Summary of the XXIV IMEKO World Congress (in session "Social Event")

Superconducting Monolithic Microwave Integrated Filtering Components in Josephson Arbitrary Waveform Synthesizer Circuits for Quantum-Based Voltage and Power Metrology at Radio Frequencies (in session "Poster Session")

Support Team (in session "Technical Visits")

Surface defect identification using Bayesian filtering on a 3D mesh (in session "Technical Sessions")

Synthesis of Analog Signals using QUBO-based Spectral Shaping of Binary Sequences (in session "Technical Sessions")

Systems metrology in future cities - the example Smart Metrology Campus (SMC) (in session "Technical Sessions")

TC1 Education and Training in Measurement and Instrumentation Session 1 (in session "Technical Sessions")

TC1 Education and Training in Measurement and Instrumentation Session 2 (in session "Technical Sessions")

TC1 Education and Training in Measurement and Instrumentation Session 3 (in session "Technical Sessions")

TC1 MM (in session "Member Meetings")

TC2 MM (in session "Member Meetings")

TC2 Opening (in session "Technical Sessions")

TC2 Photonics Session (in session "Technical Sessions")

TC2/TC14 Joint Session (in session "Technical Sessions")

TC2/TC14 Opening (in session "Technical Sessions")

TC3 Measurement of Force, Mass, Torque, and Gravity Session 1 (in session "Technical Sessions")

TC3 Measurement of Force, Mass, Torque, and Gravity Session 2 (in session "Technical Sessions")

TC3 Measurement of Force, Mass, Torque, and Gravity Session 3 (in session "Technical Sessions")

TC3 Measurement of Force, Mass, Torque, and Gravity Session 4 (in session "Technical Sessions")

TC3 Measurement of Force, Mass, Torque, and Gravity Session 5 (in session "Technical Sessions")

TC3 MM (in session "Member Meetings")

TC4 Measurement of Electrical Quantities Session 1 (in session "Technical Sessions")

TC4 Measurement of Electrical Quantities Session 2 (in session "Technical Sessions")

TC4 Measurement of Electrical Quantities Session 3 (in session "Technical Sessions")

TC4 Measurement of Electrical Quantities Session 4 (in session "Technical Sessions")

TC4 MM (in session "Member Meetings")

TC4 Opening (in session "Technical Sessions")

TC5 Hardness Measurement Session 1 + 2 (in session "Technical Sessions")

TC5 MM (in session "Member Meetings")

TC5 Opening (in session "Technical Sessions")

TC6 Digitalization Session 1 (in session "Technical Sessions")

TC6 Digitalization Session 2-1 (in session "Technical Sessions")

TC6 Digitalization Session 2-2 (in session "Technical Sessions")

TC6 Digitalization Session 3-1 (in session "Technical Sessions")

TC6 Digitalization Session 3-2 (in session "Technical Sessions")

TC6 Digitalization Session 4 (in session "Technical Sessions")

TC6 MM (in session "Member Meetings")

TC6 Opening (in session "Technical Sessions")

TC6/TC8 Joint Session (in session "Technical Sessions")

TC6/TC8 Opening (in session "Technical Sessions")

TC6/TC21 Joint Session (in session "Technical Sessions")

TC7 Measurement Science Session 1 (in session "Technical Sessions")

TC7 Measurement Science Session 2 (in session "Technical Sessions")

TC7 MM (in session "Member Meetings")

TC7 Opening (in session "Technical Sessions")

TC7/TC21 Joint Session (in session "Technical Sessions")

TC7/TC21 Opening (in session "Technical Sessions")

TC8 MM (in session "Member Meetings")

TC8 Traceability in Metrology Session 1 (in session "Technical Sessions")

TC8 Traceability in Metrology Session 2 (in session "Technical Sessions")

TC8 Traceability in Metrology Session 3 (in session "Technical Sessions")

TC8 Traceability in Metrology Session 4 (in session "Technical Sessions")

TC9 Flow Measurement Session 1 (in session "Technical Sessions")

TC9 Flow Measurement Session 2 (in session "Technical Sessions")

TC9 Flow Measurement Session 3-1 (in session "Technical Sessions")

TC9 Flow Measurement Session 3-2 (in session "Technical Sessions")

TC9 Flow Measurement Session 4-1 (in session "Technical Sessions")

TC9 Flow Measurement Session 4-2 (in session "Technical Sessions")

TC9 Flow Measurement Session 5 (in session "Technical Sessions")

TC9 Flow Measurement Session 6 (in session "Technical Sessions")

TC9 Flow Measurement Session 7 (in session "Technical Sessions")

TC9 Flow Measurement Session 8 (in session "Technical Sessions")

TC9 Flow Measurement Session 9 (in session "Technical Sessions")

TC9 Flow Measurement Session 10-1 (in session "Technical Sessions")

TC9 Flow Measurement Session 10-2 (in session "Technical Sessions")

TC9 MM (in session "Member Meetings")

TC9 Opening (in session "Technical Sessions")

TC10 Measurement for Diagnostics, Optimization and Control Session 1 (in session "Technical Sessions")

TC10 Measurement for Diagnostics, Optimization and Control Session 2 (in session "Technical Sessions")

TC10 Measurement for Diagnostics, Optimization and Control Session 3 (in session "Technical Sessions")

TC10 MM (in session "Member Meetings")

TC10 Opening (in session "Technical Sessions")

TC11 Measurement in Testing, Inspection and Certification Session 1 (in session "Technical Sessions")

TC11 Measurement in Testing, Inspection and Certification Session 2 (in session "Technical Sessions")

TC11 Measurement in Testing, Inspection and Certification Session 3 (in session "Technical Sessions")

TC11 Measurement in Testing, Inspection and Certification Session 4 (in session "Technical Sessions")

TC11 MM (in session "Member Meetings")

TC11 Opening (in session "Technical Sessions")

TC12 MM (in session "Member Meetings")

TC12 Opening (in session "Technical Sessions")

TC12 Temperature and Thermal Measurements Session 1 (in session "Technical Sessions")

TC12 Temperature and Thermal Measurements Session 2 (in session "Technical Sessions")

TC13 Measurements in Biology and Medicine Session 1 (in session "Technical Sessions")

TC13 Measurements in Biology and Medicine Session 2 (in session "Technical Sessions")

TC13 Measurements in Biology and Medicine Session 3 (in session "Technical Sessions")

TC13 MM (in session "Member Meetings")

TC13 Opening (in session "Technical Sessions")

TC14 Measurement of Geometrical Quantities Session 1 (in session "Technical Sessions")

TC14 Measurement of Geometrical Quantities Session 2 (in session "Technical Sessions")

TC14 Measurement of Geometrical Quantities Session 3 (in session "Technical Sessions")

TC14 MM (in session "Member Meetings")

TC14 Opening (in session "Technical Sessions")

TC14/TC21 Joint Session (in session "Technical Sessions")

TC14/TC21 Opening (in session "Technical Sessions")

TC15 Experimental Mechanics Session (in session "Technical Sessions")

TC15 MM (in session "Member Meetings")

TC15 Opening (in session "Technical Sessions")

TC16 MM (in session "Member Meetings")

TC16 Pressure and Vacuum Measurement Session 1 (in session "Technical Sessions")

TC16 Pressure and Vacuum Measurement Session 2 (in session "Technical Sessions")

TC16 Pressure and Vacuum Measurement Session 3 (in session "Technical Sessions")

TC16 Pressure and Vacuum Measurement Session 4 (in session "Technical Sessions")

TC16 Pressure and Vacuum Measurement Session 5 (in session "Technical Sessions")

TC17 Measurement in Robotics Session 1 (in session "Technical Sessions")

TC17 Measurement in Robotics Session 2 (in session "Technical Sessions")

TC17 MM (in session "Member Meetings")

TC17 Opening (in session "Technical Sessions")

TC18 Measurement of Human Functions Session (in session "Technical Sessions")

TC18 MM (in session "Member Meetings")

TC19 Environmental Measurements Session (in session "Technical Sessions")

TC19 MM (in session "Member Meetings")

TC20 Measurements of Energy and Related Quantities Session 1 (in session "Technical Sessions")

TC20 Measurements of Energy and Related Quantities Session 2 (in session "Technical Sessions")

TC20 MM (in session "Member Meetings")

TC21 Mathematical Tools for Measurements Session 1 (in session "Technical Sessions")

TC21 Mathematical Tools for Measurements Session 2 (in session "Technical Sessions")

TC21 Mathematical Tools for Measurements Session 3 (in session "Technical Sessions")

TC21 Mathematical Tools for Measurements Session 4 (in session "Technical Sessions")

TC21 MM (in session "Member Meetings")

TC21 Opening (in session "Technical Sessions")

TC22 MM (in session "Member Meetings")

TC22 Opening (in session "Technical Sessions")

TC22 Vibration Measurement Session 1 (in session "Technical Sessions")

TC22 Vibration Measurement Session 2 (in session "Technical Sessions")

TC22 Vibration Measurement Session 3 (in session "Technical Sessions")

TC23 Metrology in Food and Nutrition Session (in session "Technical Sessions")

TC23 MM (in session "Member Meetings")

TC23 Opening (in session "Technical Sessions")

TC24 Chemical Measurements Session 1 (in session "Technical Sessions")

TC24 Chemical Measurements Session 2 (in session "Technical Sessions")

TC24 MM (in session "Member Meetings")

TC24 Opening (in session "Technical Sessions")

TC25 MM (in session "Member Meetings")

TC25 Quantum Measurement and Quantum Information Session 1 (in session "Technical Sessions")

TC25 Quantum Measurement and Quantum Information Session 2 (in session "Technical Sessions")

TC25 Quantum Measurement and Quantum Information Session 3 (in session "Technical Sessions")

TC25 Quantum Measurement and Quantum Information Session 4 (in session "Technical Sessions")

TC25-Keynote "Quantum Sensing of Biological Systems" (in session "Technical Sessions")

Teaching gage repeatability and reproducibility analysis of measurement systems: choice of the best didactic cases (in session "Technical Sessions")

Teaching measurement science and technology in the times of pervasive AI (in session "Technical Sessions")

Teaching of electronic circuits for measuring technology at the Faculty of Electrical Engineering, CTU in Prague (in session "Technical Sessions")

Technical Visit Airbus (in session "Technical Visits")

Technical Visit Calibration Directorate North (in session "Technical Visits")

Technical Visit DESY (in session "Technical Visits")

Technical Visit EMH (in session "Technical Visits")

Technical Visit Hamburg Historical Harbour (in session "Technical Visits")

Technical Visit HHLA (in session "Technical Visits")

Technical Visit XFEL (in session "Technical Visits")

Technical Visit ZAL (in session "Technical Visits")

Temperature Dependence of a Quantum Resistance Standard at Zero External Magnetic Field (in session "Technical Sessions")

Test bench for the investigation of road temperature measurement (in session "Technical Sessions")

Text (in session "Workshop")

THE CALCULATION OF PRESSURE DISTORSION COEFFICIENT OF PRESSURE BALANCE 500 MPA BY USING THE FINITE ELEMENT METHOD (in session "Technical Sessions")

The capabilities of low air flow reproduction and the traceability (in session "Technical Sessions")

The comparison of the friction factors between NMIJ and PTB (in session "Technical Sessions")

THE ERROR CURVE OF THE VOLUME-CONVERSION DEVICES AND GAS METERS (in session "Technical Sessions")

The establishment of a quantification traceability system for solar cells (in session "Poster Session")

The EURO5000 reference baseline over a maximum distance of 5 km (in session "Poster Session")

The experimental study on oxidation- chemistry of 2-propanol and THF and their blend using Jet-Stirred reactor (in session "Poster Session")

The Impact of Digitalization on Traceability in Metrology (in session "Technical Sessions")

The liquid column manometer of PTB – first pressure measurements (in session "Poster Session")

The Method of HPPP Primary Standard Device Calibration for Sonic Nozzle Applications (in session "Poster Session")

The Metrological characterization study of thermal mass flow in electric propulsion system (in session "Technical Sessions")

The numerical simulation on discharge coefficient of sonic nozzle with hydrogen up to 70 MPa (in session "Technical Sessions")

The Quantum Revolution in Metrology (in session "Keynote")

The reliability of thermal insulation measurement results using heat flow meter apparatus with metrological traceability confirmation. (in session "Poster Session")

The Research of Force Standard Machine Tracing to the Planck Constant h (in session "Poster Session")

THE ROLE AND TASKS OF NATIONAL METROLOGICAL INSTITUTIONS IN REGULAR TRAINING OF METROLOGISTS (in session "Poster Session")

The SI Unit Mole and Avogadro Constant (in session "Technical Sessions")

The temperature DCC exposed (in session "Poster Session")

The use of Coriolis meter as transfer standards in the field of fluid flow (in session "Technical Sessions")

The use of Kalman filters in human gait analysis using depth sensors (in session "Technical Sessions")

Thermal Analysis of Optical Interferometer Manometer at CSIR-NPL India (in session "Technical Sessions")

Thermodynamic Properties of Hydrogen Containing Systems and Calculation of Gas Critical Flow Factor (in session "Poster Session")

Think Cultural Heritage : the case of bronze artefacts (in session "Technical Sessions")

Three new European Projects (2023-2026) to measure Temperatures and Pressures using Photon-based methods (in session "Technical Sessions")

Time and Frequency Dissemination and Quantum Key Distribution on the Niedersachsen Quantum Link - a Practical Approach. (in session "Technical Sessions")

TORQUE AS KEY PARAMETER FOR A BETTER EFFICENCY DETERMINATION OF ELECTRIC MOTORS AND GENERATORS (in session "Technical Sessions")

Total luminous flux unit realization and light sources measurements using newly developed Type-C gonio-photometer/spectroradiometer at SASO-NMCC (in session "Technical Sessions")

TOWARD TRACEABILITY OF LOW DIFFERENTIAL PRESSURE MEASUREMENT FOR AEROSPACE AND MEDICAL APPLICATIONS IN THAILAND (in session "Technical Sessions")

Towards Improving the Metrological Performance of a Graphite Calorimeter for Radiation Dosimetry Measurements (in session "Technical Sessions")

Towards the integration of basic knowledge of measurement data interpretation into the practical engineering education of students (in session "Technical Sessions")

Towards the Monitoring of Dialysis Treatment through Fluorescence and Absorption Techniques (in session "Poster Session")

Traceability ensuring for measurements of the physical and/or chemical characteristics of human blood by organizing the Metrological Measurements Network (in session "Technical Sessions")

Traceability for Indentation Measurements in Brinell-Vickers-Knoop Hardness (in session "Technical Sessions")

Traceability of non-removable temperature smart sensors networks applied in flow conduits using continuous monitoring techniques and self-calibration processes (in session "Technical Sessions")

Traceable Dioptric Power Measurement of Test Lenses for Focimeter Calibration Using Reciprocal Back Focal Length (in session "Technical Sessions")

Traceable Hydrogen Measurement using Laser Absorption Spectroscopy (in session "Technical Sessions")

Traceable Low Activity Concentration Calibration of Radon Detectors for Climate Change Observation Networks (in session "Technical Sessions")

Traceable Nanoscale Indentation Measurement of Film Adhesion (in session "Technical Sessions")

Traceable temperature calibration in a wind tunnel (in session "Technical Sessions")

TraGamma – A DIGITAL SERVICE FOR VALIDATING GAMMA-RAY SPECTROMETRY ANALYSIS SOFTWARE (in session "Technical Sessions")

Transfer Standard for the Assessment of Spurious Emissions in DC power (in session "Technical Sessions")

Transmon qubit as an absolute power sensor at milli-Kelvin temperatures (in session "Technical Sessions")

Trustworthy, self-fulfilling, non-redundant proficiency tests for metrological challenges in medical diagnostics (in session "Technical Sessions")

Ultra-Stable 3D-Printed Precision Voltage Divider for Calibrations and Experiments (in session "Technical Sessions")

ULTRASONIC GAS FLOW AND CONCENTRATION MEASUREMENT IN HYDROGEN AND NITROGEN GAS MIXTURES (in session "Technical Sessions")

UN SDG & WIMER Part I (in session "Workshop")

UN SDG & WIMER Part II (in session "Workshop")

Uncertainty evaluation of composite inspection methods based on the use of polarized camera (in session "Technical Sessions")

Uncertainty in Measurement for the Calibration of the Shock Sensitivity of Impact Hammers (in session "Technical Sessions")

Uncertainty-aware Machine Learning Model: Generalized Least Squares Support Vector Machine (in session "Technical Sessions")

Unit of activity (in session "Technical Visits")

Unit of time / dissemination of time (in session "Technical Visits")

Upgrading VSL’s high-pressure gas flow primary standard for gases of the energy transition (in session "Technical Sessions")

Use case of the SI Digital framework in the characterization of certified reference materials at the INM (Colombia) (in session "Technical Sessions")

Use Of A Dove Prism For Beam Rotation In The Primary Calibration Of Accelerometers (in session "Technical Sessions")

Using Known Relation Between Quantities to Make Measurements More Accurate and More Reliable (in session "Technical Sessions")

Utilizing the SI Redefinition and “NIST on a Chip” to Further Ensure Readiness Across the US Air Force, Army, and Navy (in session "Technical Sessions")

UV absorption tomography of temperature and OH radical distribution based on neural network algorithm (in session "Poster Session")

Validating 3D calibration software: assessing computational errors and investigating their influence on measurement uncertainty (in session "Technical Sessions")

Velocity measurement technology (in session "Technical Visits")

Verification of coordinate measuring machine (CMM) using standard step gauges with novel measurement model and improved uncertainty analysis (in session "Technical Sessions")

Verifying Uncertainty Analyses and International Equivalence of Low-Pressure Gas Flow Primary Standards in CMS (in session "Technical Sessions")

Vibration Measurement of Wind Turbine Blades through Image Analysis of Moiré Pattern (in session "Technical Sessions")

Video-rate confocal imaging by a differential interference contrast microscope using a polarization camera (in session "Poster Session")

Virtual Experiment of Temperature Rise Test in High-Voltage Switchgear (in session "Poster Session")

Visualisation of geometrical deviation evaluations (in session "Technical Sessions")

Wavefront aberration measurements based on the Background Oriented Schlieren method (in session "Technical Sessions")

Web-based remote electronics laboratory design and implementation (in session "Technical Sessions")

WebApp Introduction (in session "Information")

Welcome Reception (in session "Social Event")

Which Principle for Temperature Measurement in the Health and Food Sector. (in session "Poster Session")

Width Variation and Stability Analysis of tensile test method, using guidelines established in AIAG MSA Manual (in session "Technical Sessions")

Words of the new IMEKO President (in session "Social Event")

Workshop des Technischen Komittees des M4DT-IC Projektes (in session "Technical Visits")